rc edits official

 Hello everybody and welcome back to gal today we are going to be talking about transitions, how to apply them and modify them in Premiere we're going to start with built-in transitions and then I'm going to show you how to use this awesome 500-plus seamless transition pack by Pamela 5 so without further ado.  

 let's go ahead and jump on in I have a sequence of different landscape, stock video shots from storia blocks if you guys are interested in the stock video from story blocks I'll put a link in the description, so one thing to note when you're applying transitions is you don't want to overkill it you don't overdo it you don't want to put too many transitions every transition should have an intention or a purpose in your cut now.

   I made a whole video on creative cuts and one of the cuts is a match cut if you want to watch that video put a card in the upper right but essentially, these first two shots have the same movement it's forward movement on a drone so it's a great match on action right it's a very simple one but to make it even more fluid we could apply a simple cross dissolve between them so it's more seamless and fluid the first way to apply the built and cross dissolve is by right-clicking between, the two clips and applying a default transition because by default the cross dissolve is the default transition in Premiere so if you right-click between these two clips and apply default transitions, you will see the cross dissolve is applied and let's see how it looks looks pretty fluid if you need to make the duration longer you can just grab either end and you can see the duration appears just below it and it shows you how many more seconds you are adding.

    so if you want to speed 3 seconds just stop there and you'll see that it's also symmetrical so there's a same amount of raishin on the left of the cut and on the right of the cut and that's because the alignment is Center at cut if we change this to start at cut you'll see that the transition shifts over to start at the beginning, of the first cut or you can change it to end that cut so it'll start towards the beginning and end at the cut more often than not you're going to use the center out cut a couple other ways that you can change the duration that is cool to know about you can right click and you can that transition duration this way or you can go up to effect controls.

 let's say you wanted to make it two seconds you can just change it there and you can see it automatically, adapts so that is the cross dissolve another thing that you may need to do when you are editing let's say you're editing to the beat of the music and there's a beat about right here and you don't want to change the transition, what you can do is hit n on your keyboard to enable the rolling edit control and you can roll this edit cut point to meet the playhead and the transition stays the same so you can move this at any point you need and the transition remains the same it's a pretty cool tool that I use all the time.

   so the second way to apply transitions, is by going to the effects panel going to video transitions, and opening up this folder now you can see that I have a bunch of different transitions, here some of them are built-in and a few of them are paid for plugins so the dissolve folder the immersive video which are transitions, for 360 video that comes built-in premiere iris page peel slide wipe and zoom these are all built-in now if I wanted to apply a wipe between these two clips I would just open up wipe.

  if you guys are also interested I have my own store where and make my own templates, for my patrons each month where you can get them for free if you join the patreon community, but if you want to buy them one off I also sell them in my store at premiere gal com slash store thanks so much for watching everyone and I'll see you guys next time bye you 

 Hello everyone I've gotten a few questions on how I do my velocity which I'm not I'm definitely not a pro at it I've only really started doing velocity transition since, about mid-november but um I've gotten some questions anyway and I just wanted to show kind of how I do it and firstly I apologize for any fan noises and if either I completely, blow the mic or my voice is way too quiet over the fans because, 

   I have really quiet voice and talking fairly loud is quite an effort for me but anyway this is my 19:17 project file and if you're worried I've hidden all the spoilers that were in it but I really just wanted to work with this clip specifically because really this was just with utilizing the camera movement and that's really the first and foremost thing about velocity is that utilize your shots and really analyze what can move to the next thing and this isn't the best example, 

   because I used to shake to transition there, but I used one over here so with this transition you can see like in the in the clip the cameras panning to the right so I just zoomed it a bit and for this one it continued to pan to the right so use your clips analyze where the cameras heading and that's really.

  why I like 19:17 because it really it's a continuous shot, movie so it's really really good for velocity so you can see these two shots just kind of lead into each other but I'm gonna do this clip and with these adjustment layers you see that I just okay I just do a bit of blur no curves I mean just basic I did a side zoom here which you know you can see these keyframes, are not anything I really want to cover but um and it's honestly like you don't even need to do much your with blur no curves or transform or whatever you using to make you zoom and really just are trying to help the velocity out just kind of giving it that extra movement but um my filo clip is in here and always add our SMB.

    when you're doing your velocity and then you know do it after don't do it during like as you're making it because sometimes your computer can crash because ours and me really does not like computers sometimes anyway not the point but I'm just gonna delete this is what it looks like now and then we'll just try it to recreate that so first Twix it's nice but twixtor and so an important thing is you really have to mess with the framerate, with clips that are so I'll go back to this for an example with clips that are a lot of movement I know this one this one he's me you know he's pushing through all these guys there's a lot of character movement with this I put the frame rate up a lot way more than I usually do but I usually do like 12 to 15 because when your cameras panning slowly and there's not a bunch of movement from your subjects, 

    that's what you want is a low frame rate because if you do a high frame rate then there's gonna be frames that are just still kind of like this and this these two frames will stretch on for like five and it'll just look really choppy so just really play play around with the frame right and that's going on so I think I had 15 or so so starting at 100 I usually do like 300 but with things that are really slow camera movements,   

    just mess around with the values honestly so I'm gonna do 500 gear just slow it down it's just say 40 I usually do 30 or 40 and then I think I hadn't won 2-0 so I'll put that at 300 so already we're gonna get some sort of effect there so I might even put this up five seven day yeah I think that's a bit a bit closer never always gonna get it exact exact replica but I want these to change a bit I want you sometimes I honestly do leave.

the first keyframe a bit more but I mean this is a pretty close replication and for anything this is most definitely how I do it so that's really like I said very anticlimactic but that's really it I don't I'm I'm not very special this is really just these are how I do my clips yours could be different yours will be different but um this is just kind of the basic pattern of all so for anyone that wanted this um I hope this helped and for anyone that just stumbled across this I hope this helped but yeah that's I mean I'm just rambling at this point so thank you for watching although I guess I don't know bye 

                      3D Lyrics Tutorial  

Greeting Dudes! Welcome back to AB Animation studios. You are watching AB Tutorials Today we are going to create this lyric video. We are going to see how to create this 3D lyric video in after effects with simple steps. Come let's see Before going into the video, If you have not subscribed our channel, 

 Press that red subscribe button and join our family. For notification alert, Press that bell icon as well. Thanks for your continues support and for subscribing our channel For these kinds of 3D lyric videos, 

   We have to separate the chosen image into two images. Like background has to be a different image and then the main subject which is our main focus has to be separated into different images. Then only we can bring the 3d depth in after effects For that, I have imported the image in photoshop Now I am making the background as a single image (Cleaning) and then I am separating the main image, that is the main subject into a separate image. after separating the layers, save it. 

   Now let's move to after effects First import that two images into after effects After importing these images Press this comp icon And then this box will appear In this adjust the size and duration as your wish. I am going to create a status video. So I am using width as 1080 and height as 1920. You can create as your wish After finalizing everything, click ok Import these two images in the composition by drag and drop. After importing adjust the position of these images. Place the image according to the framing you need. 

    After that create your text with the help of text tool Place your text as your lyrics/song After aligning, enable 3d in all layers Then we have to create a camera. So right click and select camera. To control the camera right click and select null layer Now I am just renaming the null layer for my reference renaming this layer will help you in big projects so please start practicing.    

       Enable 3D in a null layer to control the camera. After enabling please parent the camera to null layer like this. Then only we can control the camera Now I am going to create text animation as the length of my song But I have not imported the song Just from my assumption I am adjusting the length and starting the animation. For text animation I am going to use animation composer I have already uploaded a tutorial about animation composer

    If you have not yet viewed, Please check the link in description or i card above. After applying the animation, what I am doing is... setting up my images in 3d space for that I am changing my 1 view to 2 view. After changing, move the background from the main object, so that we get more depth in the scene. That's why I am just moving the background and adjusting the background layer in 3d space.

    Now we can start animating the camera. To animate the camera randomly I'm going to use... Wiggle expression, Please give the same value. If we give this expression, it will slowly start to move in a random way, like this. For our understanding I am just adding 2 more text layers. So that we can see how the animation is happening. You can place your text... wherever you feel better. when you are doing a lyric video, always import the song first and then adjust your animations.

    I have not imported any songs in this tutorial video But when you are working, always add the song first, and then work on animation. Then only you can adjust timing properly Our animation is almost ready. Now I am going to add some more effects. I am going to apply the light leak/overlay, which I have already downloaded. 

  I hope this video will be useful for you. If you like it, Please give a like and share this video. Give me your suggestions in the comment box, and also please let us know if you need any specific tutorials. Already I have got some suggestions and will be uploading it soon. Dudes, Don't forget to press the red color subscribe button and click the bell icon and... enjoy your next video... Have a great day! We will see in the next video, until then its AB signing off 

                     Lyrics Video Making 

Let’s talk about simple text animations. Text animations are the bread and butter of many motion designers. I’m going to show you 7 different super simple dynamic text animations you could easily bust out.  

     Before we get into it I want to preface this by saying you should only be watching this if you kind of know your way around after effects. I move pretty quickly and I’m assuming you have a basic working knowledge of After Effects With that said, Let’s get started! I’ve got my text here and each line is on it’s own layer. 

     I’m going to want to create a track matte for each of these layers to hide behind, so I’m going to create a rectangle below my first line of text here. Make sure the newly created shape is on top of the text layer you want to be hidden behind it. You’ll want to repeat this for the other two lines of text. Next you’ll select alpha inverted matte under track matte and it should automatically turn the visibility of your shape layer to off. Repeat this step for the other two layers. Now we can animate. 

     I’m going to come in about 8 frames or so and keyframe my position on all of these. I’m going to come back to the start of my timeline and with all the text layers selected I’m going to drag them all behind my track mattes. I’m going to ease my end keyframes. You can do whatever you want but I’m going to do an 80% influence. You can use the graph editor to do this or use the motion script like I do. The last thing to do is to offset the animation. I’m going to drag my second layer over 2 frames and I’ll drag my third layer over 4 frames.

     Playing it back you can see this is super simple, but looks fantastic. Moving on to the next one we start again with the same 3 lines of text. This one is even more simple. I’m going to come in about 30 frames or so and create a keyframe on the position for all 3 layers. I’ll back up to the beginning of the timeline and move these layers up ever so slightly. The effect were going for here is subtle. Ease those end keyframe….. Next, you’ll want to come in about 12 frames and create a keyframe on the opacity for all 3 layers. You come back to the start and move that opacity down to zero.

  Just like we did with the last one we’re going to offset the animations. Because this one is slower and more subtle we’re going to offset the layers by 4 frames. Look at that! Awesome. Moving on with #3 we start from the same starting point with our 3 lines of text. Now I’ve actually chosen to keep all of my lines on the same text layer for this one. Lucky for us, getting the type on effect that we want is the easiest thing in the world. There’s literally a preset for it in After Effects. Under the effects panel you’ll search for typewriter.

   Once it pops up, you’ll drag the effect over to your text. It’ll automatically create start and stop keyframes. All you have to do is figure out your timing. Literally anyone could do that right? Now on to #4: This one is super fun. So we start with our first word in the center of the screen. Make sure when you position your text that your text is centered in the paragraph panel. So just like some of the other one’s were going to animate backwards.

  Somewhere around frame 15 or 16 you’ll want to set the start to about 20%. This will give the letters a little bit more of a curve as they’re animating. Honestly guys, I just had to play around a lot with this to get it where I wanted it. Just remember that all of these text animations can be financed and timed out exactly how you want them. That’s it! Let us know in the comments if you learned something today. Make sure to subscribe for future content and we’ll see you next time! 

 Ae Inspired Transition Tutorial

                 Advanced Transition Tutorial 

hey everybody Nathaniel Dodds from Tuck vidcom and today we're gonna talk about some  Alight Motion, video editing specifically this blurring whip pan a transition it's so easy to make and save you can save it as a preset you're absolutely gonna love it it's so sweet and smooth and just right now if you do enjoy this tutorial, make sure you subscribe to the channel 

    so you can check out all the Alight Motion After Effects, video editing tutorials you're gonna love it in fact let's check out the transition right here right now as we transition into this tutorial hey so check that out pretty cool right now what we're going to do is we've got this clip of a lion and it's gonna transition,to this leopard now here's what we need to do first and foremost we need to come over here and choose the new item icon down here in our project bin and choose to create a new adjustment layer yep that looks great 1920 1080 that's the size of my sequence perfect. 

  what I'm gonna do is I'm gonna drag it out and I'm just gonna drop it here near the split in my Clips right and I can just drag it out again I can make it as big as I want we're gonna kind of specify how big we want this adjustment layer to be in just a moment what I'm gonna do is have my down arrow key now the down arrow key is gonna move the playhead, to the end of the currently while currently targeted tracks in this case V's 1 through 3 are all targeted so any clips on those tracks are going to you know it's gonna respect the end of a clip so you can see it moves us exactly to the end of the Lions clip right at the beginning of the leopard clip all right I'm gonna hold my shift key and I'm gonna hit my left arrow key and just bump the playhead backward 5 frames and then I'm gonna take the end of my adjustment layer, clip it to there and then .

I'm gonna bump forward so hold down shift and hit the right arrow key once to bring me back to the split and the click and then I'll probably go like 1 2 to put it ten frames past because the the transitional, kind of really slow down as we enter the next clip alright so this is how it's gonna work five frames before the transition 10 frames after let's add some effects to this adjustment layer we're gonna come here to our effects panel I'm gonna hit the little search bar here I'm gonna type in offset and you can see there it is video effects, distort offset 

   I'm just gonna drag that out and drop it on the adjustment layer now this is a 1920 by 1080 document so the center X point is half the 1920 divided by 2 which is 960 now I want my offset to move a full like one frame see how this legree duplicates the frame and slides it over so I want this to get to negative 960 so I'm gonna type negative 960 just like that right and then I'm gonna, move my playhead over kind of to almost at the end of the adjustment layer you see there's the end of the adjustment layer, but I'm working up here in my animation timeline because right here on shift to Center I'm gonna select this little stopwatch which as Premiere Pro is telling me is the toggle animation button and that's going to drop what's called a keyframe.

 RIght out there great let's add another keyframe we're gonna do it before this because we we want this offset animation to take place over the course of the adjustment layer so just move the playhead back before that keyframe we just dropped and all we need to do is hit this reset parameter arrow that's gonna reset our shift Center to the default.

Ending: 

Adjustment layer you really can't go wrong save it as a preset be done with it and you know you lock in your keyframe so you don't to keep reanimating everything and it's just a nice compact tight little package for you if you really enjoy this type of transition so for creating this transition, in Premiere Pro and everything that goes along with it guys thanks for watching and that's it get it got it good Nathaniel Dodds InTouch vidcom I'll catch you in the next one and before you go make sure you subscribe to my channel for more great tutorials every day also by my course it helps us do what we do and this channel is supported by viewers just like you you can also just click the thumbnail and watch another video from this channel see you next time guys 

 HDR Flare Cc Tutorial

Hi welcome to all. I'm Rc Ramesh In past video we saw how to do text animation and some basics using Alight Motion If you won't see that video, just see the previous video.

  Join by clicking the below link In this video we are going to see how to do adjustment layers in Alight Motion how to make colour correction for the particular video Initially I'm going to import this video in Alight Motion So I'm here import this video in Alight Motion Then I drag this video and create the new composition As you drag like this according to the properties of the video ,the composition will create. Now the composition is create for 28 seconds I keep this only for 6 seconds remaining I'm going to trim this. 

  drag this blue color here and click right then choose trim come to work area. Our composition will trim up to 6 seconds Now we can see how to apply for this particular video. We can able to apply two types colour effects in Alight Motion. First you can apply the colors directly by choosing the option called lumetri colors In this go to effects and preses then click the window panel and choose effects and premises Now you can apply the lumetri color directly ,then If you made any changes it only affect this particular video. 

  I created the temperature as orange tone If you click this effects button it will off then again if you click it gets on. I applied this effect over this video. This lumetri color is used to do the advanced color effects If you apply this on the video it will shows effect only for this video. Another option is there. In that we have to create adjustment layer. effects will apply for all the footages which are available at the bottom of that layer? You can add another footage here. I'm going to import another footage here. If you want to paste something in these footages, It doesn't work. Do right click then click new and create adjustment layer It's like a glass sheet It looks transparent for us. just remind like this. 

   We are going to do colour correction for this layer. I'm going to do colour correction for this layer by setting some temperature level. It get applied for all the layers below. If you apply the colour tone on the glass sheet means for example if you see something by wearing the sun glass, it seems to be blue instead of orange tone. bluish tone with cooler temperature just like that. If you want to apply the effects for this layer I slightly move this ,then I'm going to off the previous effects. 

   otherwise you need too warmer At evening time during the time of sunset, if you need such type of colour you can adjust Tone gets change while adjusting Next tint means you can change the colour according to the situation you have. Next tone .here also more options are available. Exposure-it will enhance the level of exposure as in camera so I set this as zero as well as tint as zero Then fix the temperature in mid-range Next is contrast. If you increase this it shows the place too contrast which is dark. then highlight. It is opposite to the contrast. It will increase the place where it has white area like that shadows you can change all those things and achieve the tone next blacks.

 If there any blacks we can adjust it I'm going to enhance the exposure and contrast After that there is the option called saturation. It increases the overall colour vibration If we increase it fully ,it shows too strong. At the same time if you reduce too, it seems to be black and white If you choose 100% it's medium. Normally how we shoot in the camera such that. This is the basic colour correction Next there is a lot like creative,curves We will see these options in upcoming videos. If you want to see those videos .Just click the card in the top-right corner I'll meet in the next video. Until Bye.. Bye.. from Rc 

 Trending Lyrics Video Making

Hi today we will be making this pull up in the plane i'll be hopping, in the bench i slip on my chain like a face [Music] before we start i would like to thank my friend ren for lending his track for this video make sure to check him out on his social media, you will love his dope songs 

    Let's start i have prepared, some nice colors for us to use in this drawing make a new document and you have to pay close attention to what i'm doing so you won't miss any important steps i'll put this color palette to the main document, we will pick colors from this palette but it doesn't mean you are limited to the colors only in the palette just go with what looks nice to your taste and remember to always name your,layers with brush tool i will make mountains enable the rulers options from this menu the purpose of this ruler is to make sure that this pattern is loopable what i mean is that you have to make sure both sides left and right ends on this ruler line this is very important step 

So do it carefully and look closely to my steps once they are both matched, you can fill the color inside let's see it again if both sides match the ruler line left and right both ends are perfect on the line now that you have the idea we will again make one more mountain, layer again they should both match the ends now let's paint the colors for the sky like when you are done applying colors put this layer below mountain layers apply gaussian blur effect,to your sky layer you can apply any color from the sky to your mountains, just to make them a bit more interesting, make a adding the lyrics we will add effects later [Music] way up in the game but you came up came up [Music] these text animation presets i'm using these are available on my patreon page i've made several cool presets throughout the work process they are fully customizable, and give cool effects, to the text aside from text there are many more with other effects when you are done typing the lyrics select all text layers.

  pre-compose them search for drop shadow effect and put it to the text layer choose a color from the background, and play with the settings put drop shadow one more time and choose a different color from background by doing this your text should look like this simple effects but used in a good way can enhance your video even more now open position of this layer right click and choose separate dimension here type the wiggle expression, type the same with different values to the y position let's make shining stars right click and create a solid layer drag and drop fractal noise effect play with the settings until you get little shining stars as you move the evolution stars should start shining put the star's layer under that main scene composition put it below the mountains, and set the blend mode to screen create keyframe for the evolution setting move forward and change the value to some high value let's make floating lines to make this you will need a third-party plug-in called 3d stroke so be sure you have it create a solid layer drag and drop .

   3d stroke effect to the layer while your layer is selected, make some lines with pen tool enable taper option it will give a nice taper effect to the lines create keyframes, for start and end it should look like this now duplicate the layer and change the stroke color move it a little with your keyboard now turn on this little white button it will make a clipping mask it'll give a nice twisted effect to your strokes then simply place all the strokes you have made over the lyrics video and you are done all right that's it for this tutorial, i hope you enjoyed and learn something new make sure to subscribe to the channel and check out the channel of my friend rentaro for more of his cool songs i'll get back with another video goodbye [Music] never empty