rc edits official

              Transition Preset Pack Download

 i wasn't sure i was gonna make this video i wasn't sure if you guys were ready for it but you know what i said the heck with it let's do it in today's video i'm gonna be showing you guys how to make three essential transitions in  Alight Motion  not only are these transitions essential to know they will make your videos pop they will make your videos slack they will make your videos 10 times better just by using these transitions and you can make them all entirely in adobe Alight Motion

 we're not going to use after effects none of that so who's ready if you're ready hit the like button down below and let's get right into it first transition i'm going to be showing you guys how to make is a simple flash transition i actually think that the default additive dissolve transition that Alight Motion  has is absolute garbage so we're actually gonna make this flash transition completely from scratch so let's just check it out so you can see it just hits on the beat it slaps on the beat and it makes the video knock harder

 so let's get into how to make this from scratch what you want to do is come down here to your left panel and go to where it says new item hit adjustment layer go ahead and just hit okay it's as easy as that and you're just going to pull that into your timeline right here in order to make this effect you're going to come up here to your effects panel you're going to type in brightness and contrast pretty simple pretty self-explanatory and we're just going to make this flash transition lasts about six frames start here at the very beginning 

we're just gonna tab over six frames one two three four five six we're just gonna chop this excess off right there we're gonna come to this middle frame right here and we're gonna make two keyframes one on brightness one on contrast so we're just gonna go ahead and bring up the brightness a ton we're gonna change the contrast a ton and we're just gonna get creative with it you know play around with it there's no right answer there's no right way to make these flash transitions this is just one way to do it that i think is super dope you're gonna go three frames to the left one two three this is where the very beginning is and we're just gonna reset these parameters right here so that's just gonna make a new keyframe right here at the beginning and set both of these values back to zero so now when i tab over you can see it gets really bright now we're gonna go all the way to the last frame on the right one two three and we're gonna do the same thing we're just gonna reset so it's gonna get really bright and then it's gonna go right back to normal at the very end take this adjustment layer and place it over two clips just like that so now let's check that out pretty easy very simple love this effect flash transition all the way it will always be one of those effects that i use in every single type of edit i do i think making them from scratch looks way better than additive dissolve let's move on to our next effect 

so this next effect is so dope it's just a quick blur effect it's a super subtle way to transition from one clip to the next i really love this effect i think it slaps it makes the beat go crazy so let's check it out so i don't even know if you guys noticed it or not but there is a transition happening in between these two clips right here and you can see right there it just gets blurry and then it goes back to normal so check this out now there's no transition at all right here so it just goes right into the next clip what we want to do to make this transition work is just go three frames to the left from this cut one two three and then you wanna slice that clip like it's some turkey on thanksgiving so we're just gonna make a cut right there and we're gonna go six frames to the right one two three four five six we're gonna make another cut right there and we're just gonna take both of these clips that we just cut and right click them and hit nest nesting will basically bake both of those clips into a little layer so they're their own clip now you basically combine two clips into one basically so pretty cool feature in adobe Alight Motion  and then what you got to do is come up here to your effects tab and just look up this effect called fastboard

                      XML LINK HERE

 we're gonna throw one of them puppies on there and we're just gonna hit this blurriness right in the middle we're gonna keyframe this blurriness but not for horizontal and vertical no no no no that looks really blurry not really cool at all do not do that so we're just gonna pick horizontal or vertical for this i'm gonna go with the horizontal classic and we're just gonna increase the blur amount as much as we want so we can get very blurry as you can see like this but when you pick horizontal you get these kind of streaks across the screen instead of having horizontal and vertical where it's just all blurry that's why i like using horizontal and vertical personally and then what you got to do is go to the very beginning and we're going to go ahead and reset that keyframe we're going to go all the way to the end and hit reset again so now it's going to get not blurry then it gets blurry and then it gets not blurry again so let's check it out in full motion right here let's move on to the last transition which is also probably the most fire transition you can learn how to make there's a lot of ways to make it so let's get into it so for this last example 

i'm going to show you guys how to make a quick mask transition in  Alight Motion  masking is essential if you want to be good at editing videos it's something that i use in a lot of projects and there's a lot of ways to go about masking but i'm going to show you guys a creative way to use masking to create a transition in adobe Alight Motion  so check out this mask transition right here very quick very subtle very simple yeah i have my second clip that i'm transitioning to above my first clip that i'm transitioning from so that's step one you gotta have your second clip above your first clip step two is to just start right here at the very beginning and click on your top clip you're going to come up here to opacity and you're going to hit this pen tool right so what you're going to do is on this first frame you're just going to make like a shape or cut out whatever you want to do i like these like jagged cutouts that type of vibe so it looks like that and then what i like to do is decrease the mask feather we don't want that mask feather coming around here from this point you can see our first mask it's pretty dope i love this i love the way it looks a lot of ways to get creative with this so what i'm going to do from here is just keyframe our mask path right there at the first keyframe i'm gonna go ahead and go two frames to the right one two i'm gonna hit another keyframe right here and that's gonna basically just save this mask where it is now 

'm gonna go one more frame to the right i'm gonna retrace this mask a little bit so i'm just gonna drag these points out a little bit more now that we're a little bit farther into this transition we're revealing more of that clip underneath just tweaking each point that we've made and we get something like this right so pretty dope and now what we're gonna do is just go two more frames to the right one two we're gonna hit another keyframe on this one so this one saves right now we're just gonna go one more to the right and we're gonna come back up here to our mask and we're just gonna take each of these points and we're gonna keep dragging them out and it's as easy as that guys all you got to do is go frame by frame just drag these points out until you get something that looks dope you might do this a few times before you get a good result now we have that one done we're going to go ahead and finish up now so we're going to come two more to the right one two make our last keyframe there and now we're gonna reveal the entire clip underneath

 so now we're gonna go one more to the right and we're gonna highlight our mask and we're just gonna pull all these points to the edges just like that perfect this is excellent great work and boom that's all it takes so now when we kind of hover back over it you can see the transition kind of just popping out at you and when we play that back in real time check out what it looks like thanks so much for watching today's tutorial i'm feeling very excited about these next couple of videos i'm coming out with these effect videos are only going to keep getting better i'm doing a ton of research on how to make better effects and digging deep into some of my old files as well to find old effects that i've used and created 

We're going to be spilling that sauce on the internet for the foreseeable future so if you want to be a part of this community and learn and grow with us definitely consider hitting that subscribe button below and if you could only use one of these transitions that i showed you today which one would it be comment down below i'm excited to see some of your guys's responses and if you're a video editor who is serious about making videos and better edits check out my website venturevisuals.com i got a lot of sauce on there you can try out some of my products completely for free so definitely check that out i'll include a link below like i said before i'm excited for these next series of videos so stay tuned and again guys thanks for watching my video i'm jake venner peace out you 

                   PRESET LINK HERE

                         Advanced Transition 

In this tutorial i'm going to show you how to make a smooth sliding transition inside, of Alight Motion  my name is Rc and i do weekly Alight Motion and filmmaking tutorials so make sure to subscribe and hit the bell so you don't miss out on future videos.

   I got two clips on the timeline and i really want to transition, from this clip right here and into the next clip with it sliding this way so the first thing we need to do is to drag this first clip that we are transitioning, from up to video track number two and then you can select how long you want the transition to be. 

 so i really want to start around here i think and then i can drag the second clip that we are going to transition, to under the first clip so now we have these two clips stacked together and then i'm going to select the eraser tool by hitting c on my keyboard and i'm going to make a cut right here at the first clip and i'm also going to make a second cut at the second clip .

So now we have sectioned off these two clips right here then we can go and select the first clip that we are transitioning, from and we're going to work inside of effect controls so i'm going to put my playhead at the beginning of the clip and i'm going to make a keyframe so i'm going to make a keyframe for position and i'm going to go forward in the clip and make another keyframe 

 so i'm just going to drag this to the side and i just want this clip to be slightly off to the side right here just so we don't see it anymore then i'm going to drag this last keyframe, all the way to the end of the clip so now it will look something, like that this looks a little bit weird so we are going to make this other clip slide at the same speed at the first clip so first we need to hide this first clip and we can hide this video track number two by clicking the toggle track output and then it disappears then we can select the second clip.

   we're going to make some keyframes on this clip as well so let's move the playhead to the beginning of the clip and then we're going to toggle a keyframe and we're just going to drag this all the way to the other side so we are slightly off screen then i'm going to move my playhead, to almost the end of the clip again and i'm going to drag this until we have it in the same place that it should be and then i want to drag this last keyframe up there as well i'm also going to add some blur but let's see how it looks so now we just have this simple little slide transition but i'm going to add some blur so the first thing we need to do is to go down here and select new adjustment layer, 

 when you get this box here you just click ok and inside of the project bin we have this adjustment layer so i'm just going to drag this on top of both of the clips and i'm just going to trim it so it fits on the transition right here and then we're going to search for effect right here called the directional blur and you'll find that in the video effects blur and sharpen folder and you have the directional burr right here so let's drag that on top of our adjustment layer and then i'm going to go to the beginning of the clip right here.

i'm going to set the values in the directional, blur to 90 degrees so that is horizontal and then we can increase the blur and this is something you can decide how much blur or not you want but i think i'm going to go around 30 and if you play this back right now this is how it looks but if this is too slow for you i will show you how you can make this go faster so to make this go faster we can simply, select all of the clips that are in this slide transition section and we can right click and nest it so click the nest button right there and click ok and then we can go over here and use the rate stretch tool or you can just click r on your keyboard and this will allow you to adjust how fast this section of the transition 

 So let's say i want to make this double as fast i could just drag this and then we can put this first clip on there and make sure we delete this and when we play this back right now we got a faster transition on the screen right now we got another video for you to watch next and if you haven't yet make sure to subscribe,and hit the bell thank you so much for watching create an inspire and i will see you in the next video 

 Trending  Shake Preset Pack Alight Motion

 Today I'd be showing you how to do the shake effect in Alight Motion 

 Also another term is like maybe the the hit effect it's gonna basically be shaking the footage under our control so little before just someone punching, right like so nothing too interesting now when we add in our footage you'll notice that there is this sort of this punch this kick to it when he punches and it makes everything sort of tie together it gives it more force more action.

      we're gonna be doing today this is a very flexible effect, it can be used for really anything if you want to use it to like bump to a beat or sort of do something a car accident or any other sort of hits or where you just want to move it to a element a plot element then this is the perfect effect for you so first things first all we got to do is create ourselves a new sequence I'm gonna I can close out the sequence,

  I have take my footage right here, and just drag it in and it'll create itself a new sequence with all of these settings I got this footage from Envato elements which is a great place if you want to have basically unlimited amounts, of stock footage it's a monthly fee and you can download as much as you want even creates like the licensing and stuff for you which I am a big fan of if you are interested in that go ahead and check out the link in the description below it's a great deal for what you get and I love using it we are then going to go into our footage here and you'll notice that it starts off in slow motion.

     we don't want it in slow motion, so I'm gonna go ahead and right click go speed duration and just double the speed and it pretty much looks like fast motion now now what we need to do is we got to duplicate the footage so click on it hold the Alt key and drag up and you'll see that we now just have an exact replica, and what we want to do is we want to cut right before the hits so right about here move forward until after the hits are done right about there and then throw away the back footage you can click the delete key or you can right click and then go up to clear to remove, that we then have the footage and we are ready to begin first things first. 

 we're gonna go ahead and we're gonna go to the beginning, of the footage we're going to look for an effect called transform now we could just use the position up here in motion however, we lose the ability to add motion blur if we do that so what we're gonna do is we're going to drag on the transform and we're going to use these motion effects instead of these motion, effects this will again allow us to add a little motion blur make it all look a little bit better we're gonna click on our footage.

    we're then going to go into position click the little keyframe right here, we're then going to move forward and try to find the point where we want it to start maybe right about here go one frame two frames forward give it a little bit of a kick to the right we don't want to do too extreme the reason we're copying is because now the bottom layer, is sort of helping us there's not a black bar right here but if we go too far it becomes really noticeable so we just want to go a few frames up and down maybe like so if you want to do something a little bit more intense what you can do is you can actually zoom, it in so if we for example zooms it into 110 we now have the ability to move it a lot farther and it's still within our footage you just have to zoom it in a bit so it's your choice on how you want to do it don't want to zoom in past about 115 anything past that and you start losing, a lot of resolution so you have two options there either zoom it or just kind of keep it normal and make the movements very very tiny and that's what we're gonna do we're gonna make the tiny movements here.

  so I'm gonna move just a little bit over we move just a little bit up and now you'll see that when we hit it moves just a bit so then after our movement, we can click on the footage and then jump to our last keyframe, here we're to move maybe one two and then we want to reset it so we just move it out for just a second and then have it come back you can see we have just a little bit of a hit right there maybe we want to add just a little bit more flare to that so all we have to do is just find the point where it hits where we moved it and maybe make it instead of 974 like 999 90 yeah and then maybe just a tad bit more on the up here and then now let's take a look yeah it looks a little bit stronger, now and so now we're gonna do the exact same thing for the next one so create a keyframe right before they hit maybe Ray y'all do here because that actually isn't moved we'll have to choose which frame we wanna do it maybe I'll put it right here. 

   I'm gonna add the keyframe move, forward one or two frames really accent that hit a bit have it kind of out have it come up a bit the reason I'm going this direction is because that's kind of the way the force of the punch is going so I'm trying to move with the force of the punch move forward one or two frames, reset it and then now we have nice one-two right there and you can see that there's a nice sort of a strong movement with that last hit now we got to clean this up a little bit first things first let's add in that motion blur gonna go unchecked uncheck the use composition shutter, angle go to the shoulder angle bring it all the way up like so the more you bring it up the more motion blur since we're doing small motion.  

 I'm gonna bring it up as high as possible to try to add as much motion blur, as I can you see that it's not much but it does move just a little bit it blurs everything in the direction and that just kind of cleans up the action just a little bit and then we're gonna go into our effects I'm going to look for something called, cross dissolve cross dissolve is going to blend us in with the background a little bit better so click on this and drag it down we can zoom.

   we want is a couple frames here, and what this is gonna do is it's gonna blend us in with the bottom here, so it looks a little bit less noticeable whenever we go through it now we're gonna hit play you can see that we're having a pretty good effect right here so boom boom and if you notice that you watch it one time you won't notice it but if you watch it over and over you're starting to see that maybe this is moving too far off the background with the movement, and so maybe we want to try change it up a bit and maybe add just a tiny bit of zoom to it like 105 if we're gonna do it like that and now if you do that you gotta realize that if you zoom the top layer in the cross dissolves might need to be dropped otherwise. 

   you're gonna get that weird sort of zoom and zoom out, so we have the punch right there of course we can always touch it up now that we have a little zoom on it let's kind of bring it out even more a little bit bring it up some and you can see it blurs even more and now we kind of have a really strong hit happening here, that second one I say could he be even more powerful as well so bring it over really make that move maybe make that one go down and there we go now we got like a really strong sort of punch it makes this look incredibly strong.

 shake effect it's not that hard of an effect to pull off you just sort of add a little bit of motion blur use the transform, tab if you need to cross as all if you need to zoom it in and you can do this anywhere in your footage and have a really really solid and reliable and flexible way of adding the shake effect thanks I remember joining me if you have any question or comments go in the comment section below, on our website at ob masters dotnet if you want to see more videos some of this one go and that subscribe button I make a video every other day or at least I try to ah and it's all that's done guys see ya you                  

 How To Make Trending Simple Badass Transition Tutorial In Alight Motion Tutorial 

    Hello video creators welcome to Rc Edits today we're going to Simple Badass Transition making shapes with the track matte key effect to create the following transitions 

Were just few examples of what you can do with this technique once you understand how this works you'll see that the possibilities are endless and now after this energetic intro i'll slow it down and show you step by step how it's done inside premiere pro right after the message of our sponsor squarespace if you want to build your own website or web store then definitely check out squarespace i've used them for more than two years now and i can confirm that it's easy to start with their award-winning templates even if you don't have any experience with web design and their templates are built in such a way that will look great on any device like your pc tablet or smartphone use the link tourism to get the free trial or 10 discount on your first purchase the links can be found in the video description 

Add Video Clips:

Now i'm going to show you how to make this transition in adobe premiere pro inside premiere, i've already got these two clips on the timeline that will come to use for the demo we're going to start by moving the second video to the second track of the timeline and let it overlap for a few seconds with the first video here you can see the duration, of the overlap which will also be the duration for the transition 

    next we're going to switch to the eraser tool by hitting the c key and then cut the second video at the end of the first video and after that we can switch back to the selection tool by hitting the v key and then i'll move the left over of the second video back to the first track because this is the part that we're going to use for the transition.

Add Shapes:

 now it's time to add a shape to the video and in this case we're going to add a circle and we're going to do this with the ellipse tool that you can find here, which is often hidden under the pen tool we can now simply left-click somewhere in the program monitor and then draw a circle and by holding this shift key you can make a perfect circle instead of making an oval shape for the transition we'll need a circle that is about this big now we need to switch back to the selection tool by hitting the v key or click this icon here 

 next i'm going to shorten the duration of the graphic layer so it will match with the transition in the next steps we'll come to animate the circle make sure you've got the graphic layer, selected and head over to the effects control panel in here i'm going to open up the shape layer and then enable keyframes for position and skill by clicking on the stopwatch icon and then 

    i'm going to zoom out in the program monitor because we need to work outside of the frame now we're going to start the animation here in the right bottom corner.

Keyframes:

So i'm going to play around with position values until the circle is just out of the frame it might be a little hard to see but the position of the circle is here where the red box is and that's our starting position as well so we're going to move these two keyframes, to the beginning and for the next set of keyframes 

  we're going to move the circle back into the frame and then we're going to scale it up so it will fill up the entire frame and with these two sets of keyframes, we've created this animation and to make the animation a bit more smoother.   

   we're going to right click on the last set of keyframes and then select ease in and for the first set of keyframes, we'll select ease out and finally i will also move the last set of keyframes, to the end of the transition and this is what we've got so far next we're going to use this white shape to reveal the second video and to do this we need to add the track matte key effect in the effects panel ation by right clicking on the first keyframe and then select ease out and for the last keyframe we're going to select ease in and for the middle keyframes, we're going to select bezier and this is what we've got so far and to finish it off we can also enable the stroke for the rectangle and also here i'm using a gray color and i will also increase the width of the stroke and because, we've already selected the luma option you can see the results right away and that's it for this one let's have a look at the final results okay i've got one more example for you so let's go for this transition.

Second Keyframes:

we're going to add two rectangles, with the rectangle tool i'm going to add the first one on the top half of the frame and the second one on the bottom half and then i'll move back to the timeline and cut the tracks with the razor tool and remove, the parts that we don't need with the selection tool select the graphics layer move over to the effects control panel and then enable keyframes, for position for the first shape then i'm going to move this keyframe with the final position to the end of the transition and then we'll reposition the rectangle all the way to the left outside of the frame and then move this keyframe.

Finally:

 The beginning of the transition now we're going to do the same steps with the keyframes, for the next shape but in this case we'll move it to the opposite direction and also move the first keyframe, to the beginning of the transition and finally we'll also add ease in and ease out keyframes to make the animation more smoother and that's it for this example let's have a look at the final results and that also concludes this premiere pro tutorial i hope you enjoyed this one and if you did you might also want to check out this video anyway as always thanks a lot for watching, and i hope you have a wonderful day 

 Trending Zoom + Lens Blur Transition Tutorial 

Introduction:

Today i'm going to show you how to zoom in Alight Motion, also you will see how you can create different zoom effects on your footage so when zooming into our footage it all comes down to using the scale parameter here in your effects controls.

    So you can use the scale parameter to zoom in zoom out your clip you can also use your position parameter, your x value to move your clip left and right and your y value to move your clip up and down and you can reset any of these parameters, by hitting this arrow here and reset it back to the default values now one of the easiest ways to zoom in on a clip is to use what they call a punch cut or cut to close up and for this type of a zoom you don't need any key framing i have a clip here in the timeline.

Position:

 i'm just going to move my playhead over, i'm going to make two cuts here on this clip hit c for the razor tool make one cut right there bring my head over and this is where i want my punch cut to end so i'll make another cut right here hit my v key to go back to my selection tool and then i'm going to select that middle clip 

Add Keyframes:

i'm going to adjust my scale parameter and zoom in and i'm going to change my x and y values kind of center this and so as i play this back here is my zoom in or my punch, cut and now it's going to go back to the wide view and that's the easiest way to zoom if you don't want to use any keyframing, so now with this clip here we're going to zoom and we're going to use keyframes to enable keyframing come up to your effects controls, and if you're going to use position and scale together or one or the other you would click on the stopwatch right here and right away it creates default keyframes and if you move your playhead over.

  let's say i want to scale this up and when i made a change to the scale at the position of my playhead it made another keyframe and if i play this back you can see it zoomed and the distance between the initial keyframes, and the last one is the amount of time it takes for your clip to zoom in and if you need to move your keyframes at the same time just highlight them and they both turn blue and you can move them back and forth to change your starting position or your ending position or your keyframing, now to help with a smoother zoom you can highlight in this case the first keyframes and right click and come down here to temporal interpolation and say ease out and you notice that your keyframes change shape.

   i'm going to do this to my second keyframe and right click and say ease in so what we're doing here is we're actually creating a bit of acceleration, into the motion rather than to just abruptly starting and stopping so this should make it a little bit smoother looking played that back next to position,and scale if you drop down this arrow you see that your key frames have a graphical representation, and so you can grab these handles and these will give you more control over your zoom so if you want to zoom out it's basically the reverse so if i have my clip selected here and i'm going to click on scale and position to make my default keyframes.

Add Effects:

we're going to have a zoom and it's going to zoom in in the middle of two clips and it's going to have some motion blur, first you're going to come down here to the bottom of the project panel and click on this icon that's where it says new item and add adjustment layer and so i'm making sure that it is the same as my sequence and then drag that adjustment layer, over my clips that's the way it looks and put my playhead right in between the two clips and i'm going to select that adjustment layer and go into my effects and search for transform effect and i'm going to drop that on my adjustment layer.

Angle:

      i'm going to make a couple of adjustments and come down here to my transform effect, and scroll down and uncheck to use composition shutter angle,  and change that shutter angle to 360 this is going to create our motion blur in the transition now without moving the playhead i'm coming over to scale and i'm going to change the value to 300 and use my left arrow key and move my playhead back, three frames and i'm going to change my scale to 100 and so that created another keyframe there and i'm going to hit this arrow here that says go to next keyframe that's the first keyframe and then

Ending:

 i'm going to use my right arrow key and move over one frame and then click add remove keyframe, i have a new keyframe there and then i'm going to use my right arrow key to go over five frames and then here's where i'm going to change the scale back to 100 and if you want you can change the position, of these keyframes to change your timing but here's the motion blur in our transition you want more tutorials like this click or tap on one of the videos on the screen now and remember, it's never too late to learn thanks for watching see you in the next video you 

 Trending Efx Transition MP4 video Making 

Introduction:

hi friends this is video Lancer in this video I will show you a simple way to create these popular distortion zoom transitions.

    so let's start create a new composition,and import your footage --es into it create an adjustment layer cut the adjustment layer at the junction between two footages the first part of the adjustment layer, will be responsible for the beginning of the transition the second is for the ending. 

     so let's call these layers in and out respectively use transform effect for the in layer and animate parameter scale, from 100 to 300 percent now smooth the animation a little in graph editor so that speed could increase closer to the junction make this similar animation for out layer set 25% for scale value near the junction and 100% for the final key smooth the graph so that the animation slow, down at the end you to fill the blank space that appeared here use motion tile effect and increase values for output.

    nowlet's add motion blur switch off a check box in transform effect and increased,  value of shutter angle up to maximum a leaping appeared at the junction to fix this simply slide this key one frame forward this stair effect was caused by the limits in 16 samples per a frame 4 transform effect in order to fix it just add extra smoothing on problematic Clips it can be done by CC radial blur effect you,

      it's ready at this stage the transition is already looking good but we'll go on a doctor's compensation effect, on the in layer switch on checkbox reverse lens distortion for parameter fov set animation values from 0 to 160 then copy optics compensation effect to the out layer here, you should switch on the checkbox optimal pixels, for parameter fov set animation values from 160 to 0 then smooth the animation in graph editor.

   you if it is necessary you can correct the animation for scale in order it could match distorting effect maximally, well you you can add intermediate keys in order to smooth the better closer to the ending you now let's add chromatic aberrations I won't show in detail how to create them you can see this in my previous video overviews I'll just add a ready preset animate the shift parameter in the preset settings peak, should be at the junction of the transition you it is ready.  

 it looks very cool but to complete the transition, we need to add the option to change zoom target add a new null object and call it target control go to settings of chromatic aberrations and click on optic center while holding down the Alt key now link these parameters, to position of target control layer copy this expression into other effects that have point control this is the anchor point and position of transform effect center of optics compensation effect, and CC radial blur you it is ready you and finally let's add a sound effect done that is all if you like similar effects you can get hundreds of similar transitions ready for use they are power zoom elastic diamond lenz and others all the links are in the description.

  I do hope this video tutorial was useful for you next time I will show you how to create the similar zoom transition directly,in Premiere Pro subscribe to not miss this was video Lancer so long.

 Ae Inspired Transition Tutorial

                 Advanced Transition Tutorial 

hey everybody Nathaniel Dodds from Tuck vidcom and today we're gonna talk about some  Alight Motion, video editing specifically this blurring whip pan a transition it's so easy to make and save you can save it as a preset you're absolutely gonna love it it's so sweet and smooth and just right now if you do enjoy this tutorial, make sure you subscribe to the channel 

    so you can check out all the Alight Motion After Effects, video editing tutorials you're gonna love it in fact let's check out the transition right here right now as we transition into this tutorial hey so check that out pretty cool right now what we're going to do is we've got this clip of a lion and it's gonna transition,to this leopard now here's what we need to do first and foremost we need to come over here and choose the new item icon down here in our project bin and choose to create a new adjustment layer yep that looks great 1920 1080 that's the size of my sequence perfect. 

  what I'm gonna do is I'm gonna drag it out and I'm just gonna drop it here near the split in my Clips right and I can just drag it out again I can make it as big as I want we're gonna kind of specify how big we want this adjustment layer to be in just a moment what I'm gonna do is have my down arrow key now the down arrow key is gonna move the playhead, to the end of the currently while currently targeted tracks in this case V's 1 through 3 are all targeted so any clips on those tracks are going to you know it's gonna respect the end of a clip so you can see it moves us exactly to the end of the Lions clip right at the beginning of the leopard clip all right I'm gonna hold my shift key and I'm gonna hit my left arrow key and just bump the playhead backward 5 frames and then I'm gonna take the end of my adjustment layer, clip it to there and then .

I'm gonna bump forward so hold down shift and hit the right arrow key once to bring me back to the split and the click and then I'll probably go like 1 2 to put it ten frames past because the the transitional, kind of really slow down as we enter the next clip alright so this is how it's gonna work five frames before the transition 10 frames after let's add some effects to this adjustment layer we're gonna come here to our effects panel I'm gonna hit the little search bar here I'm gonna type in offset and you can see there it is video effects, distort offset 

   I'm just gonna drag that out and drop it on the adjustment layer now this is a 1920 by 1080 document so the center X point is half the 1920 divided by 2 which is 960 now I want my offset to move a full like one frame see how this legree duplicates the frame and slides it over so I want this to get to negative 960 so I'm gonna type negative 960 just like that right and then I'm gonna, move my playhead over kind of to almost at the end of the adjustment layer you see there's the end of the adjustment layer, but I'm working up here in my animation timeline because right here on shift to Center I'm gonna select this little stopwatch which as Premiere Pro is telling me is the toggle animation button and that's going to drop what's called a keyframe.

 RIght out there great let's add another keyframe we're gonna do it before this because we we want this offset animation to take place over the course of the adjustment layer so just move the playhead back before that keyframe we just dropped and all we need to do is hit this reset parameter arrow that's gonna reset our shift Center to the default.

Ending: 

Adjustment layer you really can't go wrong save it as a preset be done with it and you know you lock in your keyframe so you don't to keep reanimating everything and it's just a nice compact tight little package for you if you really enjoy this type of transition so for creating this transition, in Premiere Pro and everything that goes along with it guys thanks for watching and that's it get it got it good Nathaniel Dodds InTouch vidcom I'll catch you in the next one and before you go make sure you subscribe to my channel for more great tutorials every day also by my course it helps us do what we do and this channel is supported by viewers just like you you can also just click the thumbnail and watch another video from this channel see you next time guys 

 Trending Lyrics Video Making

Hi today we will be making this pull up in the plane i'll be hopping, in the bench i slip on my chain like a face [Music] before we start i would like to thank my friend ren for lending his track for this video make sure to check him out on his social media, you will love his dope songs 

    Let's start i have prepared, some nice colors for us to use in this drawing make a new document and you have to pay close attention to what i'm doing so you won't miss any important steps i'll put this color palette to the main document, we will pick colors from this palette but it doesn't mean you are limited to the colors only in the palette just go with what looks nice to your taste and remember to always name your,layers with brush tool i will make mountains enable the rulers options from this menu the purpose of this ruler is to make sure that this pattern is loopable what i mean is that you have to make sure both sides left and right ends on this ruler line this is very important step 

So do it carefully and look closely to my steps once they are both matched, you can fill the color inside let's see it again if both sides match the ruler line left and right both ends are perfect on the line now that you have the idea we will again make one more mountain, layer again they should both match the ends now let's paint the colors for the sky like when you are done applying colors put this layer below mountain layers apply gaussian blur effect,to your sky layer you can apply any color from the sky to your mountains, just to make them a bit more interesting, make a adding the lyrics we will add effects later [Music] way up in the game but you came up came up [Music] these text animation presets i'm using these are available on my patreon page i've made several cool presets throughout the work process they are fully customizable, and give cool effects, to the text aside from text there are many more with other effects when you are done typing the lyrics select all text layers.

  pre-compose them search for drop shadow effect and put it to the text layer choose a color from the background, and play with the settings put drop shadow one more time and choose a different color from background by doing this your text should look like this simple effects but used in a good way can enhance your video even more now open position of this layer right click and choose separate dimension here type the wiggle expression, type the same with different values to the y position let's make shining stars right click and create a solid layer drag and drop fractal noise effect play with the settings until you get little shining stars as you move the evolution stars should start shining put the star's layer under that main scene composition put it below the mountains, and set the blend mode to screen create keyframe for the evolution setting move forward and change the value to some high value let's make floating lines to make this you will need a third-party plug-in called 3d stroke so be sure you have it create a solid layer drag and drop .

   3d stroke effect to the layer while your layer is selected, make some lines with pen tool enable taper option it will give a nice taper effect to the lines create keyframes, for start and end it should look like this now duplicate the layer and change the stroke color move it a little with your keyboard now turn on this little white button it will make a clipping mask it'll give a nice twisted effect to your strokes then simply place all the strokes you have made over the lyrics video and you are done all right that's it for this tutorial, i hope you enjoyed and learn something new make sure to subscribe to the channel and check out the channel of my friend rentaro for more of his cool songs i'll get back with another video goodbye [Music] never empty 

 Soft edit Project File Download

                     

  What is up you guys so today is going to be a tutorial on how to do five warping transitions, in Alight Motion so let's get started with the tutorial okay so the first transition I'm going to use is the twirly sack so let's go to effects, and search up twirl and then we're going to add it onto our first clip okay now 

    let's go down to the settings and as you can see if I drag that angle to the right it sort of twirls in a circle and also if I keep it at like 60 and I move the radius, it rotates it a bit so I'm just going to reset these settings right now and then I'm going to go to the end of the clip where I want to transition to start and I'm going to press the two key frame buttons, for angle and twirl radius and then at the very end of the clip I'm going to adjust the angle to be about as much as I wanted tutorial so it'll be like one no three ninety nine and the twirl radius will be forty four but because you can see some of the black edges.

Keyframes:

 I'm just going to scale this so I want to stay at the end of the clip and destroy that scale up and then press the keyframe button, and then go to where our transition starts and then reset the parameter so it starts at 100 okay so now you can see that it's sort of twirls and we're going to need to do the same thing for our second clip because, it kind of looks odd just having the first clip looking like that so we can actually do is you can save this as a preset so you can actually add this to any of your video clips very easily without redoing the same settings over and over again  

 so if I select the twirl and then hold command on my keyboard, and select the motion as well and then I right click there's a set of options and I'm going to press save preset and then if you just name the preset I'll just name it twirl transition,and then press ok okay so now if we go to you sex and we can search up twirl transition like we named it and it will be under our presets and I'm just going to add it to my second clip ok bye as you can see the transition happens, at the end of the clip so we're just going to drag those keyframes. 

so I'm going to go to where the transition is kind of happening and then right before the transition starts I want to press the keyboard button for scale and then go to where the transition ends and then once again press that keyframe button, and then I'm going to go to the middle of it and just scale it into like 105 so that's that effect sort of appears through and you can do this to all these transitions, and yeah make it look like colorful I guess so yeah hope you guys enjoyed this video please give us thumbs up if you did scribe for more videos and I'll see you guys in my next video bye guys

                    Top 10 Shake Preset Pack

Hi Guy's

 what so everybody dobby mass is here and today I'd be showing you how to edit camera shake into your footage in Alight Motion so we're gonna take footage that originally looks like this just a very you know tripod shot nothing going on here and we're going to end up making it look like this where it looks like that a camera someone was actually holding the camera for this shot and this is actually really simple to accomplish we're actually using warp stabiliser of all effects to do this sort of a reverse warp stabilizer

Sequence:

 so let's get started I'll explain it along the way first thing we need to do is we need to create a sequence with our footage in it so in this situation what I have is this file right here we're going to change the sequence settings for it and you see it's just this this long sort of footage here I have this posted on my other channel it's just sort of like a ambient sort of video I'll put that I'll put a card up if you want to check that out 

   but so we have this right here and what we want to do is we want to add some camera shake to this so what we need to do is we need to find literally any clip in the world that has camera shake you can find this on YouTube you can just record you know go outside and record something you know chord your desk you can record anything as long as there's some proper contrast and warp stabiliser can sort of figure it out and so in this situation 

what I have is something that's completely and totally different than the other footage which is this right here and so we're just walking into a temple and you see there's some camera shake along the edges it's got that sort of bounce in the move and that's what we need it's all we need so we're gonna go ahead and drag that onto this footage and then I'm just going to make sure that my other piece of footage doesn't go longer than this one so we'll just cut the end right there and now they're all the same so it doesn't matter that this one's smaller than the other one that doesn't matter at all we can make it bigger

 if we want to to sort of make it fit a little bit bigger so we'll put that like right there and now it fits perfectly but what we need to do now is we need to actually nest the footage so we need to make this one a piece of footage so we're going to highlight this we're going to right click and we're going to go up to nest right here it's going to create ourselves a nested sequence we can name this like camera shake or really anything that you want we'll leave the extra eye in there and we'll click on this and now what we have is the only the top piece of footage 

is what it's doing is every time this one moved left this one will not move left and we basically just copied the camera shake from this footage onto the bottom footage and now in the final form we have it looking like a natural camera shape because it was a natural camera shake that we just transplanted onto this new footage and now there you have it we have ourselves moved from a tripod shot to a very realistic-looking handheld shot and like I said all you had to do is use warp stabiliser of all effects to do it now don't ever click the analyze button again once you click that again it's going to reanalyze for this new footage

 right here and this will become you know a tripod shot again so once you have it all set up just you know don't mess around with any of this anymore you're now good to go and you now have your camera shake ready to move things are before joining if you have any questions or comments go and dome in the comment section below or on our website I don't master yet if you would super move it is similar this one going into that subscribe button I make a video every other day on Adobe it related products and until I some guys see ya you