rc edits official

hello everyone today i'm going to show you how to make these split transitions inside the Alight Motion also i'll provide 25 split transition presets and these transitions are very easy to use you just need to drag and drop them [Music] i got a lot of questions how did i create these split transitions.

so let's get started and create these split transitions inside the Alight Motion so first import your clips to the timeline and i would like to make the transition for one second but you can make it longer or shorter as well so cut the last one second in this left clip select this razor tool and click here to make a cut again select the move tool and duplicate this cut to the top track now select this top layer and move to the effect controls tab under the opacity effect select the pen tool now we are going to make a mask in the program window let's zoom in a little bit so we make the mask properly now here

 i'm going to make the triangle mask also you can try it with different shapes  then set the mask feather zero and copy this mask one so right click here and select copy then select the bottom cut now right click on the opacity and paste it here now enable the inverted so our masking is done now we are going to animate this mask so we have to nested these two layers right click on this layer select nest and click ok again nest this bottom layer then move to the effects tab and search for the transform effect apply this effect to the both nested clips now select this top nested clip then go to the effect controls tab under the transform effect make a keyframe on the position and make sure the time indicator in the first frame then move few frames forward and make the position x and y value to zero to make this animation more smooth set these keyframe easy in and ease out move this last keyframe to the end of this clip then disable use composition shutter and set the shutter angle 180 degrees so this will add some motion blur to this animation again do the same thing for the bottom clip make keyframe on the position move this keyframe to the first frame but this time we need to double the x and y values [Music] then make these keyframe ease in and ease out  and move this last keyframe to the end of this clip disable use composition shutter and set the shutter angle 180 degrees now fit the program window and let's see the preview of this animation now move these nested clips one track above and move the second clip bottom of these nested sequence we are almost done now we need to make a little break in the middle of this transition so move the time indicator to the center of the nested sequence then select the top nested clip and make a keyframe on the position now click on the position drop down icon then pull down these two handles just like that do the same thing for the bottom nested clip and that's all for the split transition.

now let's see how to use the split transition presets so first you have to download this transitions pack you can download it under the description link to import this presets pack first open the effects tab now right click on the presets bin select import presets then select this presets pack and click open now click on the presets drop down icon and here you'll get this presets pack inside this pack you'll get two type of presets adjustment layer presets and in out presets first let's see how to use the adjustment layer presets move to the project panel and make a new adjustment layer then drag and drop it to the center of the two clips now move the time indicator to the middle of the two clips then cut 10 frames on each side of the adjustment layer and delete the unwanted part of the adjustment layer again move to the effects tab now choose any adjustment layer preset and apply it to the adjustment layer and there we go and all of this adjustment layer presets are the same process to use  now let's see how to use the in and out presets just select in preset and apply it to the right clip select out preset apply it to the left clip 

so that's all for the presets these presets are pretty easy to use hope that you'll enjoy the split transitions pack and if you have any questions please feel free to ask me on instagram i'll see you in the next one have a nice day 

 now let's see how to make these split screens inside the premiere pro for the first split screen i'm using these four video clips and every video resolution is 1920 by 1080. now select the first video clip and move over to the effect controls tab then make the scale size 50 and do the same thing for the other three clips [Music] then again select the first video clip and move the position to the left and top until the black background on the left and top has completely disappeared for the second clip move the position to the left and bottom for the third clip move the position to the right and top and for the last clip move the position to the right and bottom okay it's perfect now the last step is how to make the border so select the pen tool and draw a line between the four clips then under the effect controls tab click on the shape drop down arrow key deselect the fill and enable the stroke now make the stroke size around 15. 

also you can change the stroke color as well then make another stroke top to bottom let's small the screen size so easily i can draw this line then going back to the fit and that's it now click on v to select the move tool and adjust graphic layer duration with your clips so that's it for the first split screen [Music] now let's see how to make the second split screen and here i'm using these three video clips select the first video clip and make the scale size 50. again select the second video clip and make the scale size 50.

 then change the first video clip position to the left top and change the second video clip position to the left bottom now select the third video clip move over to the effects tab and search for crop effect apply this effect to the third video then move to the effect controls tab under the crop effect change the left and right value 25 then move the position to the left side and that's all now if you want to change the border color mark the all layers and move them one track above then go to the project panel click on the new layer icon and create a new color matte you can choose any color i like to use white color for the border then just drag and drop it under the layers and adjust the color matte duration so that's it for the second split screen.

 now let's see how to make the third split screen and here i'm using these three clips move over to the effects tab and search for radial wipe now to time apply this effect on the first layer then go to the effect controls tab under the first radial wipe effect set the transition completion 50 percent and change the start angle 130 degrees then change the wipe center something like that [Music] now under the second radial wipe set the transition completion 50 and change the start angle negative 50 degrees then again change the wipe center something like that now select the second clip then resize and reposition it until it fills the space in the left bottom corner [Music] again select the third clip and do the same thing for the right top corner okay it's perfect now let's make the border.

 so select the pen tool and make small the screen size then draw a line over the border between the two clips now set the screen size to fit and adjust the graphic layer duration and that's it for the third split screen [Music] now let's see how to make the last split screen and it's pretty easy to do here i'm using these three clips and these clips are shot by smartphone now select the first clip and change the position to left side then select the third clip and change the position to right side now if you want to change the border color mark these three layers and move them one track above then going back to the project panel and make a new color matte you can choose any color then put it under the layers and adjust the duration so that's all for the split screens if you enjoy this tutorial please give a thumbs up and don't forget to subscribe and if you have any questions please feel free to ask me on my instagram i'll see you in the next one have a nice day  you 

                       DOWNLOAD NOW

hello everyone today i'm going to show you how to make these split transitions inside the Alight Motion also i'll provide 25 split transition presets and these transitions are very easy to use you just need to drag and drop them [Music] i got a lot of questions how did i create these split transitions.

so let's get started and create these split transitions inside the Alight Motion so first import your clips to the timeline and i would like to make the transition for one second but you can make it longer or shorter as well so cut the last one second in this left clip select this razor tool and click here to make a cut again select the move tool and duplicate this cut to the top track now select this top layer and move to the effect controls tab under the opacity effect select the pen tool now we are going to make a mask in the program window let's zoom in a little bit so we make the mask properly now here

 i'm going to make the triangle mask also you can try it with different shapes  then set the mask feather zero and copy this mask one so right click here and select copy then select the bottom cut now right click on the opacity and paste it here now enable the inverted so our masking is done now we are going to animate this mask so we have to nested these two layers right click on this layer select nest and click ok again nest this bottom layer then move to the effects tab and search for the transform effect apply this effect to the both nested clips now select this top nested clip then go to the effect controls tab under the transform effect make a keyframe on the position and make sure the time indicator in the first frame then move few frames forward and make the position x and y value to zero to make this animation more smooth set these keyframe easy in and ease out move this last keyframe to the end of this clip then disable use composition shutter and set the shutter angle 180 degrees so this will add some motion blur to this animation again do the same thing for the bottom clip make keyframe on the position move this keyframe to the first frame but this time we need to double the x and y values [Music] then make these keyframe ease in and ease out  and move this last keyframe to the end of this clip disable use composition shutter and set the shutter angle 180 degrees now fit the program window and let's see the preview of this animation now move these nested clips one track above and move the second clip bottom of these nested sequence we are almost done now we need to make a little break in the middle of this transition so move the time indicator to the center of the nested sequence then select the top nested clip and make a keyframe on the position now click on the position drop down icon then pull down these two handles just like that do the same thing for the bottom nested clip and that's all for the split transition.

now let's see how to use the split transition presets so first you have to download this transitions pack you can download it under the description link to import this presets pack first open the effects tab now right click on the presets bin select import presets then select this presets pack and click open now click on the presets drop down icon and here you'll get this presets pack inside this pack you'll get two type of presets adjustment layer presets and in out presets first let's see how to use the adjustment layer presets move to the project panel and make a new adjustment layer then drag and drop it to the center of the two clips now move the time indicator to the middle of the two clips then cut 10 frames on each side of the adjustment layer and delete the unwanted part of the adjustment layer again move to the effects tab now choose any adjustment layer preset and apply it to the adjustment layer and there we go and all of this adjustment layer presets are the same process to use  now let's see how to use the in and out presets just select in preset and apply it to the right clip select out preset apply it to the left clip 

so that's all for the presets these presets are pretty easy to use hope that you'll enjoy the split transitions pack and if you have any questions please feel free to ask me on instagram i'll see you in the next one have a nice day 

 now let's see how to make these split screens inside the premiere pro for the first split screen i'm using these four video clips and every video resolution is 1920 by 1080. now select the first video clip and move over to the effect controls tab then make the scale size 50 and do the same thing for the other three clips [Music] then again select the first video clip and move the position to the left and top until the black background on the left and top has completely disappeared for the second clip move the position to the left and bottom for the third clip move the position to the right and top and for the last clip move the position to the right and bottom okay it's perfect now the last step is how to make the border so select the pen tool and draw a line between the four clips then under the effect controls tab click on the shape drop down arrow key deselect the fill and enable the stroke now make the stroke size around 15. 

also you can change the stroke color as well then make another stroke top to bottom let's small the screen size so easily i can draw this line then going back to the fit and that's it now click on v to select the move tool and adjust graphic layer duration with your clips so that's it for the first split screen [Music] now let's see how to make the second split screen and here i'm using these three video clips select the first video clip and make the scale size 50. again select the second video clip and make the scale size 50.

 then change the first video clip position to the left top and change the second video clip position to the left bottom now select the third video clip move over to the effects tab and search for crop effect apply this effect to the third video then move to the effect controls tab under the crop effect change the left and right value 25 then move the position to the left side and that's all now if you want to change the border color mark the all layers and move them one track above then go to the project panel click on the new layer icon and create a new color matte you can choose any color i like to use white color for the border then just drag and drop it under the layers and adjust the color matte duration so that's it for the second split screen.

 now let's see how to make the third split screen and here i'm using these three clips move over to the effects tab and search for radial wipe now to time apply this effect on the first layer then go to the effect controls tab under the first radial wipe effect set the transition completion 50 percent and change the start angle 130 degrees then change the wipe center something like that [Music] now under the second radial wipe set the transition completion 50 and change the start angle negative 50 degrees then again change the wipe center something like that now select the second clip then resize and reposition it until it fills the space in the left bottom corner [Music] again select the third clip and do the same thing for the right top corner okay it's perfect now let's make the border.

 so select the pen tool and make small the screen size then draw a line over the border between the two clips now set the screen size to fit and adjust the graphic layer duration and that's it for the third split screen [Music] now let's see how to make the last split screen and it's pretty easy to do here i'm using these three clips and these clips are shot by smartphone now select the first clip and change the position to left side then select the third clip and change the position to right side now if you want to change the border color mark these three layers and move them one track above then going back to the project panel and make a new color matte you can choose any color then put it under the layers and adjust the duration so that's all for the split screens if you enjoy this tutorial please give a thumbs up and don't forget to subscribe and if you have any questions please feel free to ask me on my instagram i'll see you in the next one have a nice day  you 

                       DOWNLOAD NOW

   Hey everyone. Welcome back to my alight Motion  tutorial. Today we are going to create this So let's get started. Open Alight Motion  and create a new composition. I am calling it a AMV editing tutorial. As always, I'm using the 1920 by 1080 resolution and a frame rate of 30. Also I am keeping a duration of 15 seconds. Hit Okay. And then import your audio into the project. By the way, you can download all the audio/video clips and project files from the link in the description. But these clips and audio are not copyrighted free.

 I am providing them just for educational purposes, so just be aware of that. Now press [L] double times to see the waveform. Now play this song and you can find the bass drops where you can place the video transitions. I can identify the beats by looking at the waveform the powerful or large waveform represents the bass drops. Let's import the video into the project. I have already separated my clips individually, but you can do this inside Alight Motion  as well.

 I like to place my audio file on top of our layers so that I can start working from the top. You can zoom out to the timeline using the [=] key on your keyboard. Let's hide this section to get some space. Now go to the first beat and place your video file on it. I'm going to delete this one and using the third one make sure the video cut happens exactly on the beats. You can press and hold the control or command key on your keyboard and scrub through the timeline to play the music while scrubbing. Let's go to this point and place the end point right here. I'm going to place all my videos on the beats so that the clip changes with every beat. I am fast forwarding this step to save your time. Let's play it. And this is how it looks now Of course, you can adjust according to your requirement or taste perfect. Now, in the end, my clip does not last long. So I'm going to make it a bit slow. 

So right click on it. Go to the time and choose Time Strech Here change the new duration value to 4 seconds or anything you want. Hit okay. And the clip will be slower. Now we need to do one more thing. Right click again on this layer. Go to the frame blending, and choose pixels motions. It will blend the frame smoothly so that the frame won't look choppy. Play it once again. And this is how it looks adjust the timing if needed. And now we are moving to the next step before moving to the next step.

     Let's quickly take a look at in Envato elements. Download Unlimited After Effects Templates, Logo Music, Background Music, Sound Effects, Fonts, Stock Footage, Web Templates, Mock-ups, and more. Visit the first link in the description and download anything for free for 7 days Let's get back to the tutorial. Create a new adjustment layer and call it shake and tile. Then go to the effects and the presets and search for the wiggle. This is an inbuilt preset of after effect. Place the wiggle position, as well as the wiggle rotation on this adjustment layer. Let's adjust a few settings. In the wiggle rotation. Change the wiggle amount to ten degrees. Also, I'm changing the wiggle position speed to 0.5. Let's change the rotation speed value to 0.3. Let's minimise all these effects to get some room. Play your video clips and they will start moving. But we got a problem. The edges are showing black because of the wiggle effect. 

    We can fix it very easily. Just go to the effects and the presets and search for the motion tile. Apply it and make sure to place it on top of all layers. Now change the output width value to 1000 as well as the output height value to 1000. It will fix the black bar problem. Now check this mirror edges option and everything will look fine. Check it once again. And this is looking much better. Now we are going to add the transitions. 

   Go to the position between both clips, and we will add the transition here. In case you are not able to play the video in real time and takes much longer to play, then make sure to turn down the quality to quarter or anything below the full. Now press control or command shift left arrow key to skip 10 frames to the left, then select the shake and tile layer, go to the effects and the presets and search for the transform. Apply it on the bottom of all of the effects. We already have the transform in the wiggle, but we will use it for making the transition. 

    Now apply a keyframe on the position then go to the middle of the clips and this time press control or command shift. Right arrow key to skip ten frames forward. Now change the first position value to a higher number, something like 4700. And this is the transition we are trying to achieve. Now press you to reveal all key frames and add an expression on the position keyframes. You can download this expression from the link in the description. I am changing the frequency value to one. Don't worry, you don't have to do anything. I will share this changed version Now select the expression and copy it. 

Hi there, Akio is here. today I will give a tutorial on Daddy shakes in after effects, for example like this. Cause there are some people commenting on my TikTok account, they want me to make a shake tutorial. ok, just go to the tutorial. first, enter the clip or twixtor you want to edit. then drag it to the timeline. then Pre-compose. look for the "motion tile" effect, and drag it to the clips, you can use my settings. copy the effect to another clip. then add "null". duplicate in two. connect clip to null. on the clip. press the P key then Shift + S + R. then set the X position to 220 and set the rotation to 5. don't forget to activate the keyframe. then move to the end of the clip then advance by 10 frames. And add the keyframe but don't need to change it. move to the end of the clip then rewind by 5 frames. then add a keyframe and set the X position to -120 and the rotation to -4. if so, select all the keyframes and press the F9 key on the keyboard. then for Scale, set it to 120 or according to your taste, so that the tiles don't leak. select all keyframes and their scales and press Ctrl + C. I usually do this, i.e. rewind the first keyframe shake. You can follow it too.

                 DOWNLOAD HERE

 if shake already. then we make the transition. I'll let you see my settings and graphs, and I already know that you can do it, so I don't need to explain too much. Press Ctrl + V to paste the shake that was made earlier. add two Adjustment Layers. add a "motion tile" effect on the second Adjustment Layer to create a black bar. on the first Adjustment Layer, add a "Warp" effect. change the Warp Style from ARC to FishEye. set "Bend" to 0 first. add a keyframe at the beginning and at the end. then share the end set to -100. select it and press F9 and open graph settings, then you can follow the graph I used for this. for the first Adjustment Layer, set the motion tile effect in the Output Height to approximately 90. and done, here is the result. ok, today's tutorial is here, if you like this video please click the like, share and subscribe button. 

Leave your comments below and don't forget to follow my Instagram at. I'm Akio and I'll see you in the next video. luv u guys :3 

this video is brought to you by story blog whatever you guys like Rc and welcome to where we recreate effects for famous movies and music videos and today we're having a look at three more effects from the music video seeker mode by Travis Scott featuring Drake but today we are going to do things differently because Jordy still on vacation together with his girlfriend Kim but I'm sure that they are missing us isn't that right mmm that hurts [Music] guys and that's supposed to be in this video I mean look around me I got better things to do anyway since there's a camera in me 

now I'd like to make a quick shout out to story blocks our channel sponsor sorry blocks is an online library where you can find Alight Motion  templates stock footage transitions video effects and a ton more I'm currently in Iceland making a beautiful travel video and a lot of the shots that I'll be taking here will also be published to their library so if you already have a membership you can just download them when they are available and if you aren't a member yet well then definitely make sure to check it out by clicking the first link in the description below walk further geordie as for today 

we're again having a look at psycho mode from Travis Scott and Drake because last week we showed you how to do two hyperlapse effects and a slanting effect in this video we are recreating in other three effects but this time it's all gonna be in Premiere Pro but first let's build a nice set so we're giving the cars an extra touch we're going to put these specular from spiffy gear under a car so you get that neon look like all those student cars from need for speed and fast and furious in the sync mode music video there is a certain effect named data machine this is an effect where the data of the footage is manipulated in order to achieve this kind of glitchy pixel transition now we are going to recreate its transition with Premiere Pro and an additional software if you want to create a good data mushing effect you have to create motion in your shot either do this with a camera movement or you can do it in post-production like we are going to do this way the motion will be in tensor and the effect will come out better in the music video you can also see two kinds of data mushing one we are averaging mushes and one where a person is cut out we are going to explain the one where the person is cut out because the other one works exactly the same for the one with a person cut out we are going to use a green screen in the same scene that you are putting your subject try to imagine lighting as good as possible so it really looks like he's standing in the scene to director in front of the green screen and should your background without the actor

 now let's get into Alight Motion from the project panel drag the clip from Janak into the timeline on this we are going to add a pre glitch so go to your effects panel and look for the turbulent displacement effect from the effects control panel you can set it as placement to horizontal displacements then scroll to almost the end of the clip and enable the animation for the amount and set this to zero go to the end and decrease it to 350 now we are going to set the other parameters so stick with me set-asides 253 the offset to 1080 2 by 366 it complexity 210 evolution to 187 and a random seed to 94 I know this was fast but normally you already got a kukri glitch after this you can put the background on track number 1 in a green screen shot on track number 2 and go to the opacity properties in the effects control panel you want to click on the pen tool which you can use to create a mask roughly create a mask around your actor to remove your surroundings after you have done this look for the ultra key effect in the effects panel drag that to your green screen clip and with the color picker you can then select the green to remove it now you have your actor standing in your scene simple as that nest everything together and add a simple zoom in to add some movements you can do this by animating the scale from 100 to 105 sadly you can dead Amash and Premiere Pro so we have to use a different software named data marsh studio this is a free software which you can use for data moshing and you can download it through the link in the description below before we can start with the moshing we have to have two clips to wash it all together and create a transition that's why we have to render out or two clips 

 we just made this has to be done one by one now you're probably thinking why the green-screen end well we'll come back to that later after you have two Clips you can start up the data March to do until ask you to open a project or create one just simply create a new one and create a new folder for it I'm going to do this on my desktop so we can easily find it back later when this is done adjust the width and the height to 1920 by 1080 and click Save on the top right you can then import your two videos you want to March this has to be done one by one when locating your footage it can be that you don't see your footage in your folder 

I had the same issue but that can be fixed easily adjust the format on the right bottom corner to do one from your footage now you will see all your clips select the one you want and click import double click on your clip that has to come first you can then insert it in the timeline through the panel in the right bottom quarter set the starting and end frame and press insert do the same for your second clip but check delete iframe check box from now on of course you can add as many clip as you want just don't forget to delete the iframes after you have done this set the beginning of the iframe box above the timeline to your begin clip now you can hit the export tab on the left bottom corner and press export effort it's done exporting you can hit the play button under export tab and check out what you have created fine-tune if necessary if not the program already renders it in the folder your special created for this 

let's get back into Premiere Pro and import your data Marsh clip create a new sequence with the data Marsh video on the first break now you have a data Marsh effect for everything glitches but we want to cut out Lorenzo so that he stops glitching earlier that is where the green screen shot comes in place the green screen shot on top of the data Marsh clip sync them both and trim the green screen shot to where you want it to start go into your effects control panel and to the opacity properties enable the animation for the opacity a let's start at zero go a few frames further in time and change it to a hundred another thing you can do is let the data merge background fade back to the regular background just place your background on the same track as a data Maj make a cut in the data merge background where you wanted to end and place a regular background against it and the cross dissolve if necessary whoo I hope you all got that because it will give a very cool transition effect if done right [Music] very cool indeed but now let's dive straight into the second effect which is going to be these moving overlays you can see right here in the sake of mode music clip you can do this effect on every shot you want but we are going to use our background and green-screen shot again to make it ourselves easier back in Premiere Pro you want to place your background on track number one on top of that we're going to place a star clip which we got from story blogs once you have placed your star clip on the second track create a small rectangle mask from the top to the bottom starting from the left side in the opacity property you can set its feather to zero and go to the timeline and make a cut after three frames in the clip after that cut you need to adjust your mask so that the left side is aligned with the right side of the mask of the previous clip do this until you reach the middle of your shop you can always make your shot smaller towards to end so it will end right in the middle then

 we are going to add a second star clip above the first start but what you now want to do is make all the cuts first and then one by one copy the opacity properties from the track below to the new star clip after you have done this you will offset the entire track 3 frames so that it starts when the first star clip is already one step further do this process another 6 to 7 times so that you can see a cool animation of moving masks I know it's a tedious job but it will give a very cool effect once you are done with this you can nest it all together and now you have one clip with the mask animations the next thing to do is duplicating your nested sequence as many times as you want position them on the timeline on the point where your previous animations of the mask opens up on the left side when doing this you'll create an endless loop of moving masks now again nest everything together make a duplicate of this nested sequence and in the effects panel search for flip horizontal add this to the top NASA sequence and now you have moving masks on both sides the only thing you now have to do is go to the effects control panel and in the opacity properties set the blending mode to screen you can also adjust the opacity to around 40% and before we forget add your green-screen shell to the top wallah there you have it a crew moving mask background 

                   DOWNLOAD HERE

okay guys I know it's a lot of information but hold on just a little longer because the next effect will be a short and easy one but with a super awesome result we're going to recreate this 2d 3d effect from the music clip the most important thing of the effect is a camera movement they do this will determine the outcome of the effects we're filming on the wide-angle lens so you can go really close to your subject when doing this you will create a bigger parallax effect without moving your camera too much let your subject stand still except for one element like his hands or even its eyebrow then while filming do small movement to one side this can be up or down or to the sides easy as that fire up  again and now import your footage into a new sequence then look for the wanted starting position and make it cut there go a few frames further and time and again make it cut where your movement ends delete everything else when you only have your short clip of your movement duplicate this on the same track right next to the original right click on the duplicate and look for speed and duration check the reverse speed checkbox and that's it you can now nest these two together and duplicate them as much as you want to create a longer effect just like this [] and that was it for today guys I know it was much but I hope you enjoyed it and learned everything you wanted to learn Thank You  

Hi Guy's 

hi my name Rc Edits and in this tutorial i'm going to teach you some tips about exporting frames, and even being able to arrange your own youtube thumbnails all in premiere now typically i would suggest that you just do this in Alight Motion or some sort of design program if you don't have Alight Motion, but if you are working kind of in a quick moment in premiere there are little things that you can do that you can just make it in premiere as well just as well so i have a little book club playlist on my channel which is not the traditional type of thing

I do but when i upload the videos sometimes straight from my phone i want to get a good frame i don't want to get a frame where i'm looking stupid so what i thought to do was simply take the video in premiere find the book cover online so i have a couple different options, here and i can kind of arrange them in in premiere as their own graphic layers i can move them to where i need just like this or even scale them up and make them big enough to fill in the whole side.

 if i want and if you want an easy way to just move stuff around just highlight the selection tool make sure you're in the program window and highlight that position parameter in the effects control, panel and you can just move it around kind of very similar to Alight Motion, you can scale it exactly how you like and i can put it there in the corner and then i can kind of just scrub through find a good frame maybe where i'm looking thoughtful, or not stupid looking i can even add text if i wanted like with the type tool i can write out whatever i want and move those around and even in the essential graphics panel adding backgrounds and strokes for these.

             XML FILE DOWNLOAD

 Just a simple way to build text and titles if you did want again something that you might not need to go to Alight Motion or if you don't have Alight Motion, another tool for you something like this i do always like to remember that the timestamp right now is in the corner on youtube so maybe not to put too important information there in that corner and you also have all these different video effects, that you can generate so if i wanted to generate a gradient or a ramp i can do that as well on perhaps like a new black video so new black video add that on a layer in between maybe add a ramp and in this way i can add different colored.  

Alight Motion or if you want to just check out my tutorials i've made for making thumbnail tips and basics in Alight Motion, i would recommend you do that because 90 of the time i'm making them in Alight Motion but hopefully you enjoyed this little idea and got some tips from it whether that just be the export frame button, or you picked up some other tips as well if you did enjoy this video check out my channel for more subscribe to stay tuned for all my new videos thank you so much for watching and i'll see you in the next one.

                   DOWNLOAD NOW

Introduction:

Hello everybody video Lancer is on in this video I will show you how to create such a zoom transition directly in Alight Motion, last time we reviewed how to create the similar transition and Alight Motion but as contrasted to After Effects Alight Motion, is rather limited in tools for creation of any effects so it is impossible to achieve, the same level of quality however we will make the most similar transition out of the available effects

Transition:

 so let's start create a new adjustment layer, and place it above the first clip shorten the adjustment layer so that its duration was no longer than a quarter of a second now we'll make zoom out animation, to do this it is necessary to add mirrored image copies in order to fill these holes it is easy to do in Alight Motion with the help of motion tile effect but unfortunately there is no similar effect in Alight Motion.

  so we have to use more complicated workaround rename adjustment layer, and to tile and use replicate effect set count parameter on three apply mirror effect place reflection Center accurately on the junction of two tiles copy mirror effect and make reflection for the opposite side you repeat these actions for upper and lower tiles you duplicate this adjustment layer, to the third video track remove unnecessary effects and call it scale in now apply.

Transform:

transform effect set scale value on 300 this will return image size into its original scale, due to tripling the image has lost its original quality but take into account that the transition will be quick and blurred so quality change, will be quite obscure set animation key for scale on the first frame of the layer set value 100 in the end of the layer let's add motion blur, to do this switch off this checkbox and set maximum value for shutter angle to do smoother animation edit keys graphs you.

   now let's create animation for the second part of the transition duplicate, the adjustment layer and call it scale out edit Keys graphs in order to make ending of the transition smooth you now let's add chromatic aberrations duplicate, the adjustment layer on the 4th video track remove unnecessary effects and call it aberrations extend the lair until it is a little longer than layers with scale animation, apply VR Digital glitch effect to this layer set zero value for parameter distortion rate animate parameter color distortion.

Keys:

 so that the peak was at the junction you make animation smoother with the help of graphs you now we'll add optical distortions apply lens distortion effect, animate parameter curvature so that the peak was at the junction you in order for animation to look better keys graphs, for scale and curvature can be edited a little it's ready in the final.

 let's add a sound effect you you it's ready as effects of this transition are distributed, on several layers it's impossible to save it as a standard preset however you can create nest sequence for it that can be used in other projects now you can drag this transition from project panel, into any sequence before doing this you have to switch on the option of inserting sequence from other sequences you that is all if you like similar effects.

Ending:

 you can get thousands of similar transitions ready for use all the transitions are professionally, animated and also they include a sound effect for convenience every transition has preview and is applied by simple drag-and-drop, method if you want to get this package please follow the link you can see on the screen I do hope this video tutorial was useful for you subscribe to my channel not to miss new video tutorials this was video Lancer see you later.

                   DOWNLOAD NOW

this video is brought to you by story blog whatever you guys like Rc and welcome to where we recreate effects for famous movies and music videos and today we're having a look at three more effects from the music video seeker mode by Travis Scott featuring Drake but today we are going to do things differently because Jordy still on vacation together with his girlfriend Kim but I'm sure that they are missing us isn't that right mmm that hurts [Music] guys and that's supposed to be in this video I mean look around me I got better things to do anyway since there's a camera in me 

now I'd like to make a quick shout out to story blocks our channel sponsor sorry blocks is an online library where you can find Alight Motion  templates stock footage transitions video effects and a ton more I'm currently in Iceland making a beautiful travel video and a lot of the shots that I'll be taking here will also be published to their library so if you already have a membership you can just download them when they are available and if you aren't a member yet well then definitely make sure to check it out by clicking the first link in the description below walk further geordie as for today 

we're again having a look at psycho mode from Travis Scott and Drake because last week we showed you how to do two hyperlapse effects and a slanting effect in this video we are recreating in other three effects but this time it's all gonna be in Premiere Pro but first let's build a nice set so we're giving the cars an extra touch we're going to put these specular from spiffy gear under a car so you get that neon look like all those student cars from need for speed and fast and furious in the sync mode music video there is a certain effect named data machine this is an effect where the data of the footage is manipulated in order to achieve this kind of glitchy pixel transition now we are going to recreate its transition with Premiere Pro and an additional software if you want to create a good data mushing effect you have to create motion in your shot either do this with a camera movement or you can do it in post-production like we are going to do this way the motion will be in tensor and the effect will come out better in the music video you can also see two kinds of data mushing one we are averaging mushes and one where a person is cut out we are going to explain the one where the person is cut out because the other one works exactly the same for the one with a person cut out we are going to use a green screen in the same scene that you are putting your subject try to imagine lighting as good as possible so it really looks like he's standing in the scene to director in front of the green screen and should your background without the actor

 now let's get into Alight Motion from the project panel drag the clip from Janak into the timeline on this we are going to add a pre glitch so go to your effects panel and look for the turbulent displacement effect from the effects control panel you can set it as placement to horizontal displacements then scroll to almost the end of the clip and enable the animation for the amount and set this to zero go to the end and decrease it to 350 now we are going to set the other parameters so stick with me set-asides 253 the offset to 1080 2 by 366 it complexity 210 evolution to 187 and a random seed to 94 I know this was fast but normally you already got a kukri glitch after this you can put the background on track number 1 in a green screen shot on track number 2 and go to the opacity properties in the effects control panel you want to click on the pen tool which you can use to create a mask roughly create a mask around your actor to remove your surroundings after you have done this look for the ultra key effect in the effects panel drag that to your green screen clip and with the color picker you can then select the green to remove it now you have your actor standing in your scene simple as that nest everything together and add a simple zoom in to add some movements you can do this by animating the scale from 100 to 105 sadly you can dead Amash and Premiere Pro so we have to use a different software named data marsh studio this is a free software which you can use for data moshing and you can download it through the link in the description below before we can start with the moshing we have to have two clips to wash it all together and create a transition that's why we have to render out or two clips 

 we just made this has to be done one by one now you're probably thinking why the green-screen end well we'll come back to that later after you have two Clips you can start up the data March to do until ask you to open a project or create one just simply create a new one and create a new folder for it I'm going to do this on my desktop so we can easily find it back later when this is done adjust the width and the height to 1920 by 1080 and click Save on the top right you can then import your two videos you want to March this has to be done one by one when locating your footage it can be that you don't see your footage in your folder 

I had the same issue but that can be fixed easily adjust the format on the right bottom corner to do one from your footage now you will see all your clips select the one you want and click import double click on your clip that has to come first you can then insert it in the timeline through the panel in the right bottom quarter set the starting and end frame and press insert do the same for your second clip but check delete iframe check box from now on of course you can add as many clip as you want just don't forget to delete the iframes after you have done this set the beginning of the iframe box above the timeline to your begin clip now you can hit the export tab on the left bottom corner and press export effort it's done exporting you can hit the play button under export tab and check out what you have created fine-tune if necessary if not the program already renders it in the folder your special created for this 

let's get back into Premiere Pro and import your data Marsh clip create a new sequence with the data Marsh video on the first break now you have a data Marsh effect for everything glitches but we want to cut out Lorenzo so that he stops glitching earlier that is where the green screen shot comes in place the green screen shot on top of the data Marsh clip sync them both and trim the green screen shot to where you want it to start go into your effects control panel and to the opacity properties enable the animation for the opacity a let's start at zero go a few frames further in time and change it to a hundred another thing you can do is let the data merge background fade back to the regular background just place your background on the same track as a data Maj make a cut in the data merge background where you wanted to end and place a regular background against it and the cross dissolve if necessary whoo I hope you all got that because it will give a very cool transition effect if done right [Music] very cool indeed but now let's dive straight into the second effect which is going to be these moving overlays you can see right here in the sake of mode music clip you can do this effect on every shot you want but we are going to use our background and green-screen shot again to make it ourselves easier back in Premiere Pro you want to place your background on track number one on top of that we're going to place a star clip which we got from story blogs once you have placed your star clip on the second track create a small rectangle mask from the top to the bottom starting from the left side in the opacity property you can set its feather to zero and go to the timeline and make a cut after three frames in the clip after that cut you need to adjust your mask so that the left side is aligned with the right side of the mask of the previous clip do this until you reach the middle of your shop you can always make your shot smaller towards to end so it will end right in the middle then

 we are going to add a second star clip above the first start but what you now want to do is make all the cuts first and then one by one copy the opacity properties from the track below to the new star clip after you have done this you will offset the entire track 3 frames so that it starts when the first star clip is already one step further do this process another 6 to 7 times so that you can see a cool animation of moving masks I know it's a tedious job but it will give a very cool effect once you are done with this you can nest it all together and now you have one clip with the mask animations the next thing to do is duplicating your nested sequence as many times as you want position them on the timeline on the point where your previous animations of the mask opens up on the left side when doing this you'll create an endless loop of moving masks now again nest everything together make a duplicate of this nested sequence and in the effects panel search for flip horizontal add this to the top NASA sequence and now you have moving masks on both sides the only thing you now have to do is go to the effects control panel and in the opacity properties set the blending mode to screen you can also adjust the opacity to around 40% and before we forget add your green-screen shell to the top wallah there you have it a crew moving mask background 

okay guys I know it's a lot of information but hold on just a little longer because the next effect will be a short and easy one but with a super awesome result we're going to recreate this 2d 3d effect from the music clip the most important thing of the effect is a camera movement they do this will determine the outcome of the effects we're filming on the wide-angle lens so you can go really close to your subject when doing this you will create a bigger parallax effect without moving your camera too much let your subject stand still except for one element like his hands or even its eyebrow then while filming do small movement to one side this can be up or down or to the sides easy as that fire up  again and now import your footage into a new sequence then look for the wanted starting position and make it cut there go a few frames further and time and again make it cut where your movement ends delete everything else when you only have your short clip of your movement duplicate this on the same track right next to the original right click on the duplicate and look for speed and duration check the reverse speed checkbox and that's it you can now nest these two together and duplicate them as much as you want to create a longer effect just like this [] and that was it for today guys I know it was much but I hope you enjoyed it and learned everything you wanted to learn Thank You  

                PRESET LINK HERE

hey everybody Nathaniel Dodds from Tuck vidcom and today we're gonna talk about some  Alight Motion, video editing specifically this blurring whip pan a transition it's so easy to make and save you can save it as a preset you're absolutely gonna love it it's so sweet and smooth and just right now if you do enjoy this tutorial, make sure you subscribe to the channel 

    so you can check out all the Alight Motion After Effects, video editing tutorials you're gonna love it in fact let's check out the transition right here right now as we transition into this tutorial hey so check that out pretty cool right now what we're going to do is we've got this clip of a lion and it's gonna transition,to this leopard now here's what we need to do first and foremost we need to come over here and choose the new item icon down here in our project bin and choose to create a new adjustment layer yep that looks great 1920 1080 that's the size of my sequence perfect. 

  what I'm gonna do is I'm gonna drag it out and I'm just gonna drop it here near the split in my Clips right and I can just drag it out again I can make it as big as I want we're gonna kind of specify how big we want this adjustment layer to be in just a moment what I'm gonna do is have my down arrow key now the down arrow key is gonna move the playhead, to the end of the currently while currently targeted tracks in this case V's 1 through 3 are all targeted so any clips on those tracks are going to you know it's gonna respect the end of a clip so you can see it moves us exactly to the end of the Lions clip right at the beginning of the leopard clip all right I'm gonna hold my shift key and I'm gonna hit my left arrow key and just bump the playhead backward 5 frames and then I'm gonna take the end of my adjustment layer, clip it to there and then .

I'm gonna bump forward so hold down shift and hit the right arrow key once to bring me back to the split and the click and then I'll probably go like 1 2 to put it ten frames past because the the transitional, kind of really slow down as we enter the next clip alright so this is how it's gonna work five frames before the transition 10 frames after let's add some effects to this adjustment layer we're gonna come here to our effects panel I'm gonna hit the little search bar here I'm gonna type in offset and you can see there it is video effects, distort offset 

                     MATERIALS HERE

   I'm just gonna drag that out and drop it on the adjustment layer now this is a 1920 by 1080 document so the center X point is half the 1920 divided by 2 which is 960 now I want my offset to move a full like one frame see how this legree duplicates the frame and slides it over so I want this to get to negative 960 so I'm gonna type negative 960 just like that right and then I'm gonna, move my playhead over kind of to almost at the end of the adjustment layer you see there's the end of the adjustment layer, but I'm working up here in my animation timeline because right here on shift to Center I'm gonna select this little stopwatch which as Premiere Pro is telling me is the toggle animation button and that's going to drop what's called a keyframe.

 RIght out there great let's add another keyframe we're gonna do it before this because we we want this offset animation to take place over the course of the adjustment layer so just move the playhead back before that keyframe we just dropped and all we need to do is hit this reset parameter arrow that's gonna reset our shift Center to the default.

Ending: 

Adjustment layer you really can't go wrong save it as a preset be done with it and you know you lock in your keyframe so you don't to keep reanimating everything and it's just a nice compact tight little package for you if you really enjoy this type of transition so for creating this transition, in Premiere Pro and everything that goes along with it guys thanks for watching and that's it get it got it good Nathaniel Dodds InTouch vidcom I'll catch you in the next one and before you go make sure you subscribe to my channel for more great tutorials every day also by my course it helps us do what we do and this channel is supported by viewers just like you you can also just click the thumbnail and watch another video from this channel see you next time guys 

           CLICK HERE TO DOWNLOAD

              Transition Preset Pack Download

 i wasn't sure i was gonna make this video i wasn't sure if you guys were ready for it but you know what i said the heck with it let's do it in today's video i'm gonna be showing you guys how to make three essential transitions in  Alight Motion  not only are these transitions essential to know they will make your videos pop they will make your videos slack they will make your videos 10 times better just by using these transitions and you can make them all entirely in adobe Alight Motion

 we're not going to use after effects none of that so who's ready if you're ready hit the like button down below and let's get right into it first transition i'm going to be showing you guys how to make is a simple flash transition i actually think that the default additive dissolve transition that Alight Motion  has is absolute garbage so we're actually gonna make this flash transition completely from scratch so let's just check it out so you can see it just hits on the beat it slaps on the beat and it makes the video knock harder

 so let's get into how to make this from scratch what you want to do is come down here to your left panel and go to where it says new item hit adjustment layer go ahead and just hit okay it's as easy as that and you're just going to pull that into your timeline right here in order to make this effect you're going to come up here to your effects panel you're going to type in brightness and contrast pretty simple pretty self-explanatory and we're just going to make this flash transition lasts about six frames start here at the very beginning 

we're just gonna tab over six frames one two three four five six we're just gonna chop this excess off right there we're gonna come to this middle frame right here and we're gonna make two keyframes one on brightness one on contrast so we're just gonna go ahead and bring up the brightness a ton we're gonna change the contrast a ton and we're just gonna get creative with it you know play around with it there's no right answer there's no right way to make these flash transitions this is just one way to do it that i think is super dope you're gonna go three frames to the left one two three this is where the very beginning is and we're just gonna reset these parameters right here so that's just gonna make a new keyframe right here at the beginning and set both of these values back to zero so now when i tab over you can see it gets really bright now we're gonna go all the way to the last frame on the right one two three and we're gonna do the same thing we're just gonna reset so it's gonna get really bright and then it's gonna go right back to normal at the very end take this adjustment layer and place it over two clips just like that so now let's check that out pretty easy very simple love this effect flash transition all the way it will always be one of those effects that i use in every single type of edit i do i think making them from scratch looks way better than additive dissolve let's move on to our next effect 

so this next effect is so dope it's just a quick blur effect it's a super subtle way to transition from one clip to the next i really love this effect i think it slaps it makes the beat go crazy so let's check it out so i don't even know if you guys noticed it or not but there is a transition happening in between these two clips right here and you can see right there it just gets blurry and then it goes back to normal so check this out now there's no transition at all right here so it just goes right into the next clip what we want to do to make this transition work is just go three frames to the left from this cut one two three and then you wanna slice that clip like it's some turkey on thanksgiving so we're just gonna make a cut right there and we're gonna go six frames to the right one two three four five six we're gonna make another cut right there and we're just gonna take both of these clips that we just cut and right click them and hit nest nesting will basically bake both of those clips into a little layer so they're their own clip now you basically combine two clips into one basically so pretty cool feature in adobe Alight Motion  and then what you got to do is come up here to your effects tab and just look up this effect called fastboard

 we're gonna throw one of them puppies on there and we're just gonna hit this blurriness right in the middle we're gonna keyframe this blurriness but not for horizontal and vertical no no no no that looks really blurry not really cool at all do not do that so we're just gonna pick horizontal or vertical for this i'm gonna go with the horizontal classic and we're just gonna increase the blur amount as much as we want so we can get very blurry as you can see like this but when you pick horizontal you get these kind of streaks across the screen instead of having horizontal and vertical where it's just all blurry that's why i like using horizontal and vertical personally and then what you got to do is go to the very beginning and we're going to go ahead and reset that keyframe we're going to go all the way to the end and hit reset again so now it's going to get not blurry then it gets blurry and then it gets not blurry again so let's check it out in full motion right here let's move on to the last transition which is also probably the most fire transition you can learn how to make there's a lot of ways to make it so let's get into it so for this last example 

i'm going to show you guys how to make a quick mask transition in  Alight Motion  masking is essential if you want to be good at editing videos it's something that i use in a lot of projects and there's a lot of ways to go about masking but i'm going to show you guys a creative way to use masking to create a transition in adobe Alight Motion  so check out this mask transition right here very quick very subtle very simple yeah i have my second clip that i'm transitioning to above my first clip that i'm transitioning from so that's step one you gotta have your second clip above your first clip step two is to just start right here at the very beginning and click on your top clip you're going to come up here to opacity and you're going to hit this pen tool right so what you're going to do is on this first frame you're just going to make like a shape or cut out whatever you want to do i like these like jagged cutouts that type of vibe so it looks like that and then what i like to do is decrease the mask feather we don't want that mask feather coming around here from this point you can see our first mask it's pretty dope i love this i love the way it looks a lot of ways to get creative with this so what i'm going to do from here is just keyframe our mask path right there at the first keyframe i'm gonna go ahead and go two frames to the right one two i'm gonna hit another keyframe right here and that's gonna basically just save this mask where it is now 

I'm gonna go one more frame to the right i'm gonna retrace this mask a little bit so i'm just gonna drag these points out a little bit more now that we're a little bit farther into this transition we're revealing more of that clip underneath just tweaking each point that we've made and we get something like this right so pretty dope and now what we're gonna do is just go two more frames to the right one two we're gonna hit another keyframe on this one so this one saves right now we're just gonna go one more to the right and we're gonna come back up here to our mask and we're just gonna take each of these points and we're gonna keep dragging them out and it's as easy as that guys all you got to do is go frame by frame just drag these points out until you get something that looks dope you might do this a few times before you get a good result now we have that one done we're going to go ahead and finish up now so we're going to come two more to the right one two make our last keyframe there and now we're gonna reveal the entire clip underneath

 so now we're gonna go one more to the right and we're gonna highlight our mask and we're just gonna pull all these points to the edges just like that perfect this is excellent great work and boom that's all it takes so now when we kind of hover back over it you can see the transition kind of just popping out at you and when we play that back in real time check out what it looks like thanks so much for watching today's tutorial i'm feeling very excited about these next couple of videos i'm coming out with these effect videos are only going to keep getting better i'm doing a ton of research on how to make better effects and digging deep into some of my old files as well to find old effects that i've used and created 

          CLICK HERE TO DOWNLOAD

We're going to be spilling that sauce on the internet for the foreseeable future so if you want to be a part of this community and learn and grow with us definitely consider hitting that subscribe button below and if you could only use one of these transitions that i showed you today which one would it be comment down below i'm excited to see some of your guys's responses and if you're a video editor who is serious about making videos and better edits check out my website venturevisuals.com i got a lot of sauce on there you can try out some of my products completely for free so definitely check that out i'll include a link below like i said before i'm excited for these next series of videos so stay tuned and again guys thanks for watching my video i'm jake venner peace out you