rc edits official

 Hello everybody and welcome back to gal today we are going to be talking about transitions, how to apply them and modify them in Premiere we're going to start with built-in transitions and then I'm going to show you how to use this awesome 500-plus seamless transition pack by Pamela 5 so without further ado.  

 let's go ahead and jump on in I have a sequence of different landscape, stock video shots from storia blocks if you guys are interested in the stock video from story blocks I'll put a link in the description, so one thing to note when you're applying transitions is you don't want to overkill it you don't overdo it you don't want to put too many transitions every transition should have an intention or a purpose in your cut now.

   I made a whole video on creative cuts and one of the cuts is a match cut if you want to watch that video put a card in the upper right but essentially, these first two shots have the same movement it's forward movement on a drone so it's a great match on action right it's a very simple one but to make it even more fluid we could apply a simple cross dissolve between them so it's more seamless and fluid the first way to apply the built and cross dissolve is by right-clicking between, the two clips and applying a default transition because by default the cross dissolve is the default transition in Premiere so if you right-click between these two clips and apply default transitions, you will see the cross dissolve is applied and let's see how it looks looks pretty fluid if you need to make the duration longer you can just grab either end and you can see the duration appears just below it and it shows you how many more seconds you are adding.

    so if you want to speed 3 seconds just stop there and you'll see that it's also symmetrical so there's a same amount of raishin on the left of the cut and on the right of the cut and that's because the alignment is Center at cut if we change this to start at cut you'll see that the transition shifts over to start at the beginning, of the first cut or you can change it to end that cut so it'll start towards the beginning and end at the cut more often than not you're going to use the center out cut a couple other ways that you can change the duration that is cool to know about you can right click and you can that transition duration this way or you can go up to effect controls.

 let's say you wanted to make it two seconds you can just change it there and you can see it automatically, adapts so that is the cross dissolve another thing that you may need to do when you are editing let's say you're editing to the beat of the music and there's a beat about right here and you don't want to change the transition, what you can do is hit n on your keyboard to enable the rolling edit control and you can roll this edit cut point to meet the playhead and the transition stays the same so you can move this at any point you need and the transition remains the same it's a pretty cool tool that I use all the time.

   so the second way to apply transitions, is by going to the effects panel going to video transitions, and opening up this folder now you can see that I have a bunch of different transitions, here some of them are built-in and a few of them are paid for plugins so the dissolve folder the immersive video which are transitions, for 360 video that comes built-in premiere iris page peel slide wipe and zoom these are all built-in now if I wanted to apply a wipe between these two clips I would just open up wipe.

  if you guys are also interested I have my own store where and make my own templates, for my patrons each month where you can get them for free if you join the patreon community, but if you want to buy them one off I also sell them in my store at premiere gal com slash store thanks so much for watching everyone and I'll see you guys next time bye you 

 Hello everyone I've gotten a few questions on how I do my velocity which I'm not I'm definitely not a pro at it I've only really started doing velocity transition since, about mid-november but um I've gotten some questions anyway and I just wanted to show kind of how I do it and firstly I apologize for any fan noises and if either I completely, blow the mic or my voice is way too quiet over the fans because, 

   I have really quiet voice and talking fairly loud is quite an effort for me but anyway this is my 19:17 project file and if you're worried I've hidden all the spoilers that were in it but I really just wanted to work with this clip specifically because really this was just with utilizing the camera movement and that's really the first and foremost thing about velocity is that utilize your shots and really analyze what can move to the next thing and this isn't the best example, 

   because I used to shake to transition there, but I used one over here so with this transition you can see like in the in the clip the cameras panning to the right so I just zoomed it a bit and for this one it continued to pan to the right so use your clips analyze where the cameras heading and that's really.

  why I like 19:17 because it really it's a continuous shot, movie so it's really really good for velocity so you can see these two shots just kind of lead into each other but I'm gonna do this clip and with these adjustment layers you see that I just okay I just do a bit of blur no curves I mean just basic I did a side zoom here which you know you can see these keyframes, are not anything I really want to cover but um and it's honestly like you don't even need to do much your with blur no curves or transform or whatever you using to make you zoom and really just are trying to help the velocity out just kind of giving it that extra movement but um my filo clip is in here and always add our SMB.

    when you're doing your velocity and then you know do it after don't do it during like as you're making it because sometimes your computer can crash because ours and me really does not like computers sometimes anyway not the point but I'm just gonna delete this is what it looks like now and then we'll just try it to recreate that so first Twix it's nice but twixtor and so an important thing is you really have to mess with the framerate, with clips that are so I'll go back to this for an example with clips that are a lot of movement I know this one this one he's me you know he's pushing through all these guys there's a lot of character movement with this I put the frame rate up a lot way more than I usually do but I usually do like 12 to 15 because when your cameras panning slowly and there's not a bunch of movement from your subjects, 

    that's what you want is a low frame rate because if you do a high frame rate then there's gonna be frames that are just still kind of like this and this these two frames will stretch on for like five and it'll just look really choppy so just really play play around with the frame right and that's going on so I think I had 15 or so so starting at 100 I usually do like 300 but with things that are really slow camera movements,   

    just mess around with the values honestly so I'm gonna do 500 gear just slow it down it's just say 40 I usually do 30 or 40 and then I think I hadn't won 2-0 so I'll put that at 300 so already we're gonna get some sort of effect there so I might even put this up five seven day yeah I think that's a bit a bit closer never always gonna get it exact exact replica but I want these to change a bit I want you sometimes I honestly do leave.

the first keyframe a bit more but I mean this is a pretty close replication and for anything this is most definitely how I do it so that's really like I said very anticlimactic but that's really it I don't I'm I'm not very special this is really just these are how I do my clips yours could be different yours will be different but um this is just kind of the basic pattern of all so for anyone that wanted this um I hope this helped and for anyone that just stumbled across this I hope this helped but yeah that's I mean I'm just rambling at this point so thank you for watching although I guess I don't know bye 

                      3D Lyrics Tutorial  

Greeting Dudes! Welcome back to AB Animation studios. You are watching AB Tutorials Today we are going to create this lyric video. We are going to see how to create this 3D lyric video in after effects with simple steps. Come let's see Before going into the video, If you have not subscribed our channel, 

 Press that red subscribe button and join our family. For notification alert, Press that bell icon as well. Thanks for your continues support and for subscribing our channel For these kinds of 3D lyric videos, 

   We have to separate the chosen image into two images. Like background has to be a different image and then the main subject which is our main focus has to be separated into different images. Then only we can bring the 3d depth in after effects For that, I have imported the image in photoshop Now I am making the background as a single image (Cleaning) and then I am separating the main image, that is the main subject into a separate image. after separating the layers, save it. 

   Now let's move to after effects First import that two images into after effects After importing these images Press this comp icon And then this box will appear In this adjust the size and duration as your wish. I am going to create a status video. So I am using width as 1080 and height as 1920. You can create as your wish After finalizing everything, click ok Import these two images in the composition by drag and drop. After importing adjust the position of these images. Place the image according to the framing you need. 

    After that create your text with the help of text tool Place your text as your lyrics/song After aligning, enable 3d in all layers Then we have to create a camera. So right click and select camera. To control the camera right click and select null layer Now I am just renaming the null layer for my reference renaming this layer will help you in big projects so please start practicing.    

       Enable 3D in a null layer to control the camera. After enabling please parent the camera to null layer like this. Then only we can control the camera Now I am going to create text animation as the length of my song But I have not imported the song Just from my assumption I am adjusting the length and starting the animation. For text animation I am going to use animation composer I have already uploaded a tutorial about animation composer

    If you have not yet viewed, Please check the link in description or i card above. After applying the animation, what I am doing is... setting up my images in 3d space for that I am changing my 1 view to 2 view. After changing, move the background from the main object, so that we get more depth in the scene. That's why I am just moving the background and adjusting the background layer in 3d space.

    Now we can start animating the camera. To animate the camera randomly I'm going to use... Wiggle expression, Please give the same value. If we give this expression, it will slowly start to move in a random way, like this. For our understanding I am just adding 2 more text layers. So that we can see how the animation is happening. You can place your text... wherever you feel better. when you are doing a lyric video, always import the song first and then adjust your animations.

    I have not imported any songs in this tutorial video But when you are working, always add the song first, and then work on animation. Then only you can adjust timing properly Our animation is almost ready. Now I am going to add some more effects. I am going to apply the light leak/overlay, which I have already downloaded. 

  I hope this video will be useful for you. If you like it, Please give a like and share this video. Give me your suggestions in the comment box, and also please let us know if you need any specific tutorials. Already I have got some suggestions and will be uploading it soon. Dudes, Don't forget to press the red color subscribe button and click the bell icon and... enjoy your next video... Have a great day! We will see in the next video, until then its AB signing off 

                     Lyrics Video Making 

Let’s talk about simple text animations. Text animations are the bread and butter of many motion designers. I’m going to show you 7 different super simple dynamic text animations you could easily bust out.  

     Before we get into it I want to preface this by saying you should only be watching this if you kind of know your way around after effects. I move pretty quickly and I’m assuming you have a basic working knowledge of After Effects With that said, Let’s get started! I’ve got my text here and each line is on it’s own layer. 

     I’m going to want to create a track matte for each of these layers to hide behind, so I’m going to create a rectangle below my first line of text here. Make sure the newly created shape is on top of the text layer you want to be hidden behind it. You’ll want to repeat this for the other two lines of text. Next you’ll select alpha inverted matte under track matte and it should automatically turn the visibility of your shape layer to off. Repeat this step for the other two layers. Now we can animate. 

     I’m going to come in about 8 frames or so and keyframe my position on all of these. I’m going to come back to the start of my timeline and with all the text layers selected I’m going to drag them all behind my track mattes. I’m going to ease my end keyframes. You can do whatever you want but I’m going to do an 80% influence. You can use the graph editor to do this or use the motion script like I do. The last thing to do is to offset the animation. I’m going to drag my second layer over 2 frames and I’ll drag my third layer over 4 frames.

     Playing it back you can see this is super simple, but looks fantastic. Moving on to the next one we start again with the same 3 lines of text. This one is even more simple. I’m going to come in about 30 frames or so and create a keyframe on the position for all 3 layers. I’ll back up to the beginning of the timeline and move these layers up ever so slightly. The effect were going for here is subtle. Ease those end keyframe….. Next, you’ll want to come in about 12 frames and create a keyframe on the opacity for all 3 layers. You come back to the start and move that opacity down to zero.

  Just like we did with the last one we’re going to offset the animations. Because this one is slower and more subtle we’re going to offset the layers by 4 frames. Look at that! Awesome. Moving on with #3 we start from the same starting point with our 3 lines of text. Now I’ve actually chosen to keep all of my lines on the same text layer for this one. Lucky for us, getting the type on effect that we want is the easiest thing in the world. There’s literally a preset for it in After Effects. Under the effects panel you’ll search for typewriter.

   Once it pops up, you’ll drag the effect over to your text. It’ll automatically create start and stop keyframes. All you have to do is figure out your timing. Literally anyone could do that right? Now on to #4: This one is super fun. So we start with our first word in the center of the screen. Make sure when you position your text that your text is centered in the paragraph panel. So just like some of the other one’s were going to animate backwards.

  Somewhere around frame 15 or 16 you’ll want to set the start to about 20%. This will give the letters a little bit more of a curve as they’re animating. Honestly guys, I just had to play around a lot with this to get it where I wanted it. Just remember that all of these text animations can be financed and timed out exactly how you want them. That’s it! Let us know in the comments if you learned something today. Make sure to subscribe for future content and we’ll see you next time! 

 Ae Inspired Transition Tutorial

                 Advanced Transition Tutorial 

hey everybody Nathaniel Dodds from Tuck vidcom and today we're gonna talk about some  Alight Motion, video editing specifically this blurring whip pan a transition it's so easy to make and save you can save it as a preset you're absolutely gonna love it it's so sweet and smooth and just right now if you do enjoy this tutorial, make sure you subscribe to the channel 

    so you can check out all the Alight Motion After Effects, video editing tutorials you're gonna love it in fact let's check out the transition right here right now as we transition into this tutorial hey so check that out pretty cool right now what we're going to do is we've got this clip of a lion and it's gonna transition,to this leopard now here's what we need to do first and foremost we need to come over here and choose the new item icon down here in our project bin and choose to create a new adjustment layer yep that looks great 1920 1080 that's the size of my sequence perfect. 

  what I'm gonna do is I'm gonna drag it out and I'm just gonna drop it here near the split in my Clips right and I can just drag it out again I can make it as big as I want we're gonna kind of specify how big we want this adjustment layer to be in just a moment what I'm gonna do is have my down arrow key now the down arrow key is gonna move the playhead, to the end of the currently while currently targeted tracks in this case V's 1 through 3 are all targeted so any clips on those tracks are going to you know it's gonna respect the end of a clip so you can see it moves us exactly to the end of the Lions clip right at the beginning of the leopard clip all right I'm gonna hold my shift key and I'm gonna hit my left arrow key and just bump the playhead backward 5 frames and then I'm gonna take the end of my adjustment layer, clip it to there and then .

I'm gonna bump forward so hold down shift and hit the right arrow key once to bring me back to the split and the click and then I'll probably go like 1 2 to put it ten frames past because the the transitional, kind of really slow down as we enter the next clip alright so this is how it's gonna work five frames before the transition 10 frames after let's add some effects to this adjustment layer we're gonna come here to our effects panel I'm gonna hit the little search bar here I'm gonna type in offset and you can see there it is video effects, distort offset 

   I'm just gonna drag that out and drop it on the adjustment layer now this is a 1920 by 1080 document so the center X point is half the 1920 divided by 2 which is 960 now I want my offset to move a full like one frame see how this legree duplicates the frame and slides it over so I want this to get to negative 960 so I'm gonna type negative 960 just like that right and then I'm gonna, move my playhead over kind of to almost at the end of the adjustment layer you see there's the end of the adjustment layer, but I'm working up here in my animation timeline because right here on shift to Center I'm gonna select this little stopwatch which as Premiere Pro is telling me is the toggle animation button and that's going to drop what's called a keyframe.

 RIght out there great let's add another keyframe we're gonna do it before this because we we want this offset animation to take place over the course of the adjustment layer so just move the playhead back before that keyframe we just dropped and all we need to do is hit this reset parameter arrow that's gonna reset our shift Center to the default.

Ending: 

Adjustment layer you really can't go wrong save it as a preset be done with it and you know you lock in your keyframe so you don't to keep reanimating everything and it's just a nice compact tight little package for you if you really enjoy this type of transition so for creating this transition, in Premiere Pro and everything that goes along with it guys thanks for watching and that's it get it got it good Nathaniel Dodds InTouch vidcom I'll catch you in the next one and before you go make sure you subscribe to my channel for more great tutorials every day also by my course it helps us do what we do and this channel is supported by viewers just like you you can also just click the thumbnail and watch another video from this channel see you next time guys 

 HDR Flare Cc Tutorial

Hi welcome to all. I'm Rc Ramesh In past video we saw how to do text animation and some basics using Alight Motion If you won't see that video, just see the previous video.

  Join by clicking the below link In this video we are going to see how to do adjustment layers in Alight Motion how to make colour correction for the particular video Initially I'm going to import this video in Alight Motion So I'm here import this video in Alight Motion Then I drag this video and create the new composition As you drag like this according to the properties of the video ,the composition will create. Now the composition is create for 28 seconds I keep this only for 6 seconds remaining I'm going to trim this. 

  drag this blue color here and click right then choose trim come to work area. Our composition will trim up to 6 seconds Now we can see how to apply for this particular video. We can able to apply two types colour effects in Alight Motion. First you can apply the colors directly by choosing the option called lumetri colors In this go to effects and preses then click the window panel and choose effects and premises Now you can apply the lumetri color directly ,then If you made any changes it only affect this particular video. 

  I created the temperature as orange tone If you click this effects button it will off then again if you click it gets on. I applied this effect over this video. This lumetri color is used to do the advanced color effects If you apply this on the video it will shows effect only for this video. Another option is there. In that we have to create adjustment layer. effects will apply for all the footages which are available at the bottom of that layer? You can add another footage here. I'm going to import another footage here. If you want to paste something in these footages, It doesn't work. Do right click then click new and create adjustment layer It's like a glass sheet It looks transparent for us. just remind like this. 

   We are going to do colour correction for this layer. I'm going to do colour correction for this layer by setting some temperature level. It get applied for all the layers below. If you apply the colour tone on the glass sheet means for example if you see something by wearing the sun glass, it seems to be blue instead of orange tone. bluish tone with cooler temperature just like that. If you want to apply the effects for this layer I slightly move this ,then I'm going to off the previous effects. 

   otherwise you need too warmer At evening time during the time of sunset, if you need such type of colour you can adjust Tone gets change while adjusting Next tint means you can change the colour according to the situation you have. Next tone .here also more options are available. Exposure-it will enhance the level of exposure as in camera so I set this as zero as well as tint as zero Then fix the temperature in mid-range Next is contrast. If you increase this it shows the place too contrast which is dark. then highlight. It is opposite to the contrast. It will increase the place where it has white area like that shadows you can change all those things and achieve the tone next blacks.

 If there any blacks we can adjust it I'm going to enhance the exposure and contrast After that there is the option called saturation. It increases the overall colour vibration If we increase it fully ,it shows too strong. At the same time if you reduce too, it seems to be black and white If you choose 100% it's medium. Normally how we shoot in the camera such that. This is the basic colour correction Next there is a lot like creative,curves We will see these options in upcoming videos. If you want to see those videos .Just click the card in the top-right corner I'll meet in the next video. Until Bye.. Bye.. from Rc 

 Trending Lyrics Video Making

Hi today we will be making this pull up in the plane i'll be hopping, in the bench i slip on my chain like a face [Music] before we start i would like to thank my friend ren for lending his track for this video make sure to check him out on his social media, you will love his dope songs 

    Let's start i have prepared, some nice colors for us to use in this drawing make a new document and you have to pay close attention to what i'm doing so you won't miss any important steps i'll put this color palette to the main document, we will pick colors from this palette but it doesn't mean you are limited to the colors only in the palette just go with what looks nice to your taste and remember to always name your,layers with brush tool i will make mountains enable the rulers options from this menu the purpose of this ruler is to make sure that this pattern is loopable what i mean is that you have to make sure both sides left and right ends on this ruler line this is very important step 

So do it carefully and look closely to my steps once they are both matched, you can fill the color inside let's see it again if both sides match the ruler line left and right both ends are perfect on the line now that you have the idea we will again make one more mountain, layer again they should both match the ends now let's paint the colors for the sky like when you are done applying colors put this layer below mountain layers apply gaussian blur effect,to your sky layer you can apply any color from the sky to your mountains, just to make them a bit more interesting, make a adding the lyrics we will add effects later [Music] way up in the game but you came up came up [Music] these text animation presets i'm using these are available on my patreon page i've made several cool presets throughout the work process they are fully customizable, and give cool effects, to the text aside from text there are many more with other effects when you are done typing the lyrics select all text layers.

  pre-compose them search for drop shadow effect and put it to the text layer choose a color from the background, and play with the settings put drop shadow one more time and choose a different color from background by doing this your text should look like this simple effects but used in a good way can enhance your video even more now open position of this layer right click and choose separate dimension here type the wiggle expression, type the same with different values to the y position let's make shining stars right click and create a solid layer drag and drop fractal noise effect play with the settings until you get little shining stars as you move the evolution stars should start shining put the star's layer under that main scene composition put it below the mountains, and set the blend mode to screen create keyframe for the evolution setting move forward and change the value to some high value let's make floating lines to make this you will need a third-party plug-in called 3d stroke so be sure you have it create a solid layer drag and drop .

   3d stroke effect to the layer while your layer is selected, make some lines with pen tool enable taper option it will give a nice taper effect to the lines create keyframes, for start and end it should look like this now duplicate the layer and change the stroke color move it a little with your keyboard now turn on this little white button it will make a clipping mask it'll give a nice twisted effect to your strokes then simply place all the strokes you have made over the lyrics video and you are done all right that's it for this tutorial, i hope you enjoyed and learn something new make sure to subscribe to the channel and check out the channel of my friend rentaro for more of his cool songs i'll get back with another video goodbye [Music] never empty 

 TOP 3 Cc Presets Pack

                         Top 3 Cc Presets 

hey guys jill here for premiere basics a weekly series where we teach you all the ins and outs of adobe premiere pro, last week adobe released a brand new feature that lets you color grade your footage with just one click of a button currently, it is only available within the beta version of premiere pro 

  so first let's open up the adobe creative cloud app and move to the beta apps menu then download the beta version of premiere after it's installed open up the beta app and you'll notice that the import menu is already different,  but that's something that we've talked about in a previous video which you can see by clicking the link in the top right corner now 

   i'm going to import some, footage which will be some log footage that we've shot and some stock clips from story blocks that already have a decent color grade we're now going to color grade these clips to get some nice looking colors to start color grading move to the window menu and select the lumetri color panel if you have never color graded before let me give you a quick introduction within the lumetri panel, we have multiple tabs the first one is the basic correction tab from here we can make as the name indicates basic adjustments to our contrast and exposure but also the temperature of your shot.

  next is the creative tab from here you can add luts which you can technically, also do in the basic correction tab but if you apply it here you can still adjust stuff later on in the basic corrections, in the creative tab you can also add sharpness vibrance and saturation next up is the curved step from here you can use the curves to control exposure and colors but in a more advanced way you can also play around with the hue saturation, and luma controls to control specific colors on your shot next is the color wheels and match tab and here you can add specific colors to either the shadows mid-tones or highlights, next is the hsl secondary tab which you can use to make selections of specific colors which is an ideal way to create better skin tones for example and lastly we have the vignette tab which is basically, to create a vignette obviously but you have clicked on this video to see the brand new one-click color grade feature in premiere so let's now wait any longer. 

 when you go back to the basic correction, step you will see a new button which says auto tone now if you click this premiere will apply intelligent auto corrections to your footage and this is all done with the sliders of the basic correction step which means that afterwards you can still have full control over it and change anything if needed so why is this so useful well for beginner video editors this is a fast and easy way to apply a quick and nice looking color grade to your footage as a start you can then use for example the color wheels.

 and results actually look pretty damn great so i can't wait for adobe to release it officially for everyone to use it i hope you enjoyed this video and learned something new and if so make sure to hit the like button turn on post notifications and of course subscribe to the channel and feel free to share this video with your friends or on your socials i'll see you again next week with a new tutorial and as always stay creative.

 Candy Style Transition

                          Soft edit Project file

Hi Guy's with Candy Style transitions, they're a really effective way to make your video feel a lot more cohesive and professional and if you're watching this video I'm pretty sure you've been exposed to a lot of transition packs, and tutorials on how to get those awesome totally cool transitions but today we're gonna be showing you how to create for super simple transitions right inside of Alight Motion.

These are so simple that maybe you'll start to incorporate them into your regular workflow and we're going to avoid transitions, that have gotten a lot of love maybe too much love from the internet so no zoom blurs hopefully you haven't seen all of these before so let's dive right into it with number, one the card whip this one you might have seen in some of our other tutorials in the past your at motion array,

    it's just like treating your footage like a set of stacked cards and when you want to move on to the next one so once you've got your footage down, on the timeline place your first clip on the second layer and your second clip on the first layer like a descending staircase next overlap them, slightly and on your top clip drop on the transform effect from your effects panel.

  once it's here find where you want the transition to happen and keyframe, your position at the start of the transition now move to where you want the transition to finish and keyframe, the position to have your footage completely off screen you'll probably only need a few frames to make this look right make sure that at all times between these two keyframes there's a piece of footage overlapping underneath, this top clip then click this drop down and activate the graph for your motion and keyframes.

So now we can set a position keyframe, where we want these clips to start separating and then make a second keyframe and set it to be just off-screen, then by using these back and forward icons for our keyframe we can bring the playhead back to exactly the same location to make matching but opposite keyframes, for our bottom clip so now we have a linear separation but I want to make it a little bit more dynamic bring up the positions.

 Alight Motion but like I mentioned, if you want to take your transitions to the next level we have tons of transitions for you to check out here at motion, or Raycom we also have a ton of Alight Motion plug-in transitions that you can download at no additional cost to an existing paid motion or a membership and finally if more learning is your cup of tea we've also got loads of other tutorials for Alight Motion, and After Effects feel free to check those out too but that's it for me thank you so much for watching and I can't wait to see you in the next video you.

 Soft edit Project File Download

                     

  What is up you guys so today is going to be a tutorial on how to do five warping transitions, in Alight Motion so let's get started with the tutorial okay so the first transition I'm going to use is the twirly sack so let's go to effects, and search up twirl and then we're going to add it onto our first clip okay now 

    let's go down to the settings and as you can see if I drag that angle to the right it sort of twirls in a circle and also if I keep it at like 60 and I move the radius, it rotates it a bit so I'm just going to reset these settings right now and then I'm going to go to the end of the clip where I want to transition to start and I'm going to press the two key frame buttons, for angle and twirl radius and then at the very end of the clip I'm going to adjust the angle to be about as much as I wanted tutorial so it'll be like one no three ninety nine and the twirl radius will be forty four but because you can see some of the black edges.

Keyframes:

 I'm just going to scale this so I want to stay at the end of the clip and destroy that scale up and then press the keyframe button, and then go to where our transition starts and then reset the parameter so it starts at 100 okay so now you can see that it's sort of twirls and we're going to need to do the same thing for our second clip because, it kind of looks odd just having the first clip looking like that so we can actually do is you can save this as a preset so you can actually add this to any of your video clips very easily without redoing the same settings over and over again  

 so if I select the twirl and then hold command on my keyboard, and select the motion as well and then I right click there's a set of options and I'm going to press save preset and then if you just name the preset I'll just name it twirl transition,and then press ok okay so now if we go to you sex and we can search up twirl transition like we named it and it will be under our presets and I'm just going to add it to my second clip ok bye as you can see the transition happens, at the end of the clip so we're just going to drag those keyframes. 

so I'm going to go to where the transition is kind of happening and then right before the transition starts I want to press the keyboard button for scale and then go to where the transition ends and then once again press that keyframe button, and then I'm going to go to the middle of it and just scale it into like 105 so that's that effect sort of appears through and you can do this to all these transitions, and yeah make it look like colorful I guess so yeah hope you guys enjoyed this video please give us thumbs up if you did scribe for more videos and I'll see you guys in my next video bye guys

                    Top 10 Shake Preset Pack

Hi Guy's

 what so everybody dobby mass is here and today I'd be showing you how to edit camera shake into your footage in Alight Motion so we're gonna take footage that originally looks like this just a very you know tripod shot nothing going on here and we're going to end up making it look like this where it looks like that a camera someone was actually holding the camera for this shot and this is actually really simple to accomplish we're actually using warp stabiliser of all effects to do this sort of a reverse warp stabilizer

Sequence:

 so let's get started I'll explain it along the way first thing we need to do is we need to create a sequence with our footage in it so in this situation what I have is this file right here we're going to change the sequence settings for it and you see it's just this this long sort of footage here I have this posted on my other channel it's just sort of like a ambient sort of video I'll put that I'll put a card up if you want to check that out 

   but so we have this right here and what we want to do is we want to add some camera shake to this so what we need to do is we need to find literally any clip in the world that has camera shake you can find this on YouTube you can just record you know go outside and record something you know chord your desk you can record anything as long as there's some proper contrast and warp stabiliser can sort of figure it out and so in this situation 

what I have is something that's completely and totally different than the other footage which is this right here and so we're just walking into a temple and you see there's some camera shake along the edges it's got that sort of bounce in the move and that's what we need it's all we need so we're gonna go ahead and drag that onto this footage and then I'm just going to make sure that my other piece of footage doesn't go longer than this one so we'll just cut the end right there and now they're all the same so it doesn't matter that this one's smaller than the other one that doesn't matter at all we can make it bigger

 if we want to to sort of make it fit a little bit bigger so we'll put that like right there and now it fits perfectly but what we need to do now is we need to actually nest the footage so we need to make this one a piece of footage so we're going to highlight this we're going to right click and we're going to go up to nest right here it's going to create ourselves a nested sequence we can name this like camera shake or really anything that you want we'll leave the extra eye in there and we'll click on this and now what we have is the only the top piece of footage 

is what it's doing is every time this one moved left this one will not move left and we basically just copied the camera shake from this footage onto the bottom footage and now in the final form we have it looking like a natural camera shape because it was a natural camera shake that we just transplanted onto this new footage and now there you have it we have ourselves moved from a tripod shot to a very realistic-looking handheld shot and like I said all you had to do is use warp stabiliser of all effects to do it now don't ever click the analyze button again once you click that again it's going to reanalyze for this new footage

 right here and this will become you know a tripod shot again so once you have it all set up just you know don't mess around with any of this anymore you're now good to go and you now have your camera shake ready to move things are before joining if you have any questions or comments go and dome in the comment section below or on our website I don't master yet if you would super move it is similar this one going into that subscribe button I make a video every other day on Adobe it related products and until I some guys see ya you 

 Trending Flip Transition 

                    Flip Transition Transition 

Introduction:

Hello everybody video Lancer is on in this video I will show you how to create such a zoom transition directly in Alight Motion, last time we reviewed how to create the similar transition and Alight Motion but as contrasted to After Effects Alight Motion, is rather limited in tools for creation of any effects so it is impossible to achieve, the same level of quality however we will make the most similar transition out of the available effects

Transition:

 so let's start create a new adjustment layer, and place it above the first clip shorten the adjustment layer so that its duration was no longer than a quarter of a second now we'll make zoom out animation, to do this it is necessary to add mirrored image copies in order to fill these holes it is easy to do in Alight Motion with the help of motion tile effect but unfortunately there is no similar effect in Alight Motion.

  so we have to use more complicated workaround rename adjustment layer, and to tile and use replicate effect set count parameter on three apply mirror effect place reflection Center accurately on the junction of two tiles copy mirror effect and make reflection for the opposite side you repeat these actions for upper and lower tiles you duplicate this adjustment layer, to the third video track remove unnecessary effects and call it scale in now apply.

Transform:

transform effect set scale value on 300 this will return image size into its original scale, due to tripling the image has lost its original quality but take into account that the transition will be quick and blurred so quality change, will be quite obscure set animation key for scale on the first frame of the layer set value 100 in the end of the layer let's add motion blur, to do this switch off this checkbox and set maximum value for shutter angle to do smoother animation edit keys graphs you.

   now let's create animation for the second part of the transition duplicate, the adjustment layer and call it scale out edit Keys graphs in order to make ending of the transition smooth you now let's add chromatic aberrations duplicate, the adjustment layer on the 4th video track remove unnecessary effects and call it aberrations extend the lair until it is a little longer than layers with scale animation, apply VR Digital glitch effect to this layer set zero value for parameter distortion rate animate parameter color distortion.

Keys:

 so that the peak was at the junction you make animation smoother with the help of graphs you now we'll add optical distortions apply lens distortion effect, animate parameter curvature so that the peak was at the junction you in order for animation to look better keys graphs, for scale and curvature can be edited a little it's ready in the final.

 let's add a sound effect you you it's ready as effects of this transition are distributed, on several layers it's impossible to save it as a standard preset however you can create nest sequence for it that can be used in other projects now you can drag this transition from project panel, into any sequence before doing this you have to switch on the option of inserting sequence from other sequences you that is all if you like similar effects.

Ending:

 you can get thousands of similar transitions ready for use all the transitions are professionally, animated and also they include a sound effect for convenience every transition has preview and is applied by simple drag-and-drop, method if you want to get this package please follow the link you can see on the screen I do hope this video tutorial was useful for you subscribe to my channel not to miss new video tutorials this was video Lancer see you later.

 Trending Shake Preset Pack

                      Shake Preset Pack 

Introduction:

Hello guys, welcome back to premiere essential. In today's video, I will give you 330 safe transitions pre set for Alight Motion. And I will show you how you can import the P sets in Alight Motion andhow to apply it on an entry. So let's get started. You can download free set transition by click on the first link in the description down below. 

Transition:

This transition pre set are compatible with premium pro 2021 or above version. After that navigate to effects panel and right click here and choose import pre sets. After that simply select your P sets file. Now you can see that the P set folder in effects panel. With the name of say presets. Here we have different type of transition that you can easily apply it on any of your clip. For apply the transition effect, simply create a cut in the last of your clip. And create another cut the starting of your clip as well. And here we have two types of transition like in and out. Which we can easily apply in the starting of clip and in the end of clip. 

   Simply select any transition and apply on the starting point of clip and on the end portion of clip. You can also change the setting from effects control panel. And that's it guys. This is applied on our clip. You can see the result with play the video. You can try different types of transition as well on your clip. 

   And let us know in the comment that how you will use these transitions and share your experience with us. So if you like the video kindly subscribe to our channel and don't forget to hit the like button. So good bye for today. See you soon in the next video. Bye bye, peace. 

 Dp

Hi Guy's 

hi my name Rc Edits and in this tutorial i'm going to teach you some tips about exporting frames, and even being able to arrange your own youtube thumbnails all in premiere now typically i would suggest that you just do this in Alight Motion or some sort of design program if you don't have Alight Motion, but if you are working kind of in a quick moment in premiere there are little things that you can do that you can just make it in premiere as well just as well so i have a little book club playlist on my channel which is not the traditional type of thing

I do but when i upload the videos sometimes straight from my phone i want to get a good frame i don't want to get a frame where i'm looking stupid so what i thought to do was simply take the video in premiere find the book cover online so i have a couple different options, here and i can kind of arrange them in in premiere as their own graphic layers i can move them to where i need just like this or even scale them up and make them big enough to fill in the whole side.

 if i want and if you want an easy way to just move stuff around just highlight the selection tool make sure you're in the program window and highlight that position parameter in the effects control, panel and you can just move it around kind of very similar to Alight Motion, you can scale it exactly how you like and i can put it there in the corner and then i can kind of just scrub through find a good frame maybe where i'm looking thoughtful, or not stupid looking i can even add text if i wanted like with the type tool i can write out whatever i want and move those around and even in the essential graphics panel adding backgrounds and strokes for these.

 Just a simple way to build text and titles if you did want again something that you might not need to go to Alight Motion or if you don't have Alight Motion, another tool for you something like this i do always like to remember that the timestamp right now is in the corner on youtube so maybe not to put too important information there in that corner and you also have all these different video effects, that you can generate so if i wanted to generate a gradient or a ramp i can do that as well on perhaps like a new black video so new black video add that on a layer in between maybe add a ramp and in this way i can add different colored.  

Alight Motion or if you want to just check out my tutorials i've made for making thumbnail tips and basics in Alight Motion, i would recommend you do that because 90 of the time i'm making them in Alight Motion but hopefully you enjoyed this little idea and got some tips from it whether that just be the export frame button, or you picked up some other tips as well if you did enjoy this video check out my channel for more subscribe to stay tuned for all my new videos thank you so much for watching and i'll see you in the next one.

 Stylish Cc Video Making 

                   High Quality HDR Cc Preset

Hi Guys

    this tutorials channel intern and both of us together are going to tell you how to edit in Alight Motion  so Alight Motion  is by far the most popular video editing software, in the world and assuming that you've never edited a video for in your life this video for you alright guys so the Alight Motion ,interface is so crazy easy you're gonna open it up it's gonna look all confusing but if you just remember that it all boils down to four different quadrants you're gonna realize that there isn't really a lot that you're dealing with we're not set designers but we thought that this centerpiece just kind of kept the room classy let's get back into it Alight Motion.

you can't see but the computers actually below the camera Kirk is going to be controlling the computer as I'm explaining so the first thing that you do is you click on premiere you now have something called, the new project window you're going to go and label your project which you want it then you're going to click browse and you're gonna place it in the location that you want it to be saved on your computer, far as the renderer goes you're gonna have two options either than mercury playback engine GPU acceleration CUDA or the software only option you're gonna be able to use CUDA if you have a strong enough graphics card if your graphics card sucks you're gonna only have this off they're only version that's fine for now just do CUDA.

You can then click OK okay premiere is now opening and voila for quadrants crazy so check this out the first thing that we're going to do is we're going to go into the project 2 window and we're going to right click and we're gonna do import once you click import you're going to be able to choose which clips you want to import, so we're going to now import a clip now you actually probably not gonna only just import one clip because the point of video editing is to actually edit a bunch of Clips together to create one final video project.

 so let's import a few more you're gonna realize that we're actually doing this tutorial on a PC not a Mac you're gonna,realize though that this process is going to look almost exactly the same on a Mac and I would advise you to think about maybe switching the PC windows is actually a better editing operating system I feel like if you're gonna choose to edit in Premiere, more on that in another video guys you're gonna see all these extra tabs in place I don't usually use those so we're gonna actually clear them so what you do is you just right-click and then you do closed panel I'm gonna close the media browser I'm gonna close libraries I'm gonna close info markers and history so we're just gonna, be left with the project tab and the effects tab in the project 2 window so now we have these long clips in our project window now we need to choose the portion of the clips that we want to edit in our final video so what we're gonna do is we're going to double click on one of the clips and bam you're gonna now see that it comes up in the window on top.